Notifications
Clear all
Printer enclosure
Posted : 03/06/2019 3:49 am
Topic starter
answered:
RE: Printer enclosure
Posted : 03/06/2019 4:01 am
RE: Printer enclosure
Keep an eye out for temps if you're printing PLA. You need to allow air circulation to avoid the PLA softening and jamming on you.
Posted : 03/06/2019 4:35 am
Topic starter
answered:
RE: Printer enclosure
Thanks for the advice.I have fitted 2 DC circulating fans to keep the air moving and have done approximately 200 hours printing with no issues.
i have found i have very consistantly good results with the enclosure at 24 degrees celsius
Posted : 03/06/2019 7:00 pm