Avisos
Vaciar todo

How this comunity can help Ukraine?  

  RSS
Peki
 Peki
(@peki)
Active Member
How this comunity can help Ukraine?

??

Respondido : 02/03/2022 8:50 am
mmp me gusta
Peki
 Peki
(@peki)
Active Member
Topic starter answered:
RE: How this comunity can help Ukraine?

3D printed remote controlled Molotov cocktail launcher?

Respondido : 02/03/2022 8:52 am
Shinobi42
(@shinobi42)
Active Member
RE: How this comunity can help Ukraine?

We could print shields with the Ukrainian flag and the text "Refugees welcome" or "Слава Україні!" and share them with our friends and families. Unfortunately we do not have an appropriate blue PETG Prusament in the shop.

Respondido : 02/03/2022 10:55 am
bobstro
(@bobstro)
Illustrious Member
RE: How this comunity can help Ukraine?

It's a nice sentiment, but to be honest: I'm sure there are items the Ukrainians would much rather be getting. I'd hate to clog the supply lines with ultimately useless 3D printed stuff. Back when the COVID PPE printing push was on, a lot of groups were getting incomplete or useless 3D printed stuff. The local fire department received stacks of frames, but no transparent shield of any sort and had no idea what to do with them.

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Respondido : 02/03/2022 4:29 pm
Lichtjaeger me gusta
ForSalisbury
(@forsalisbury)
New Member
RE: How this comunity can help Ukraine?

If we assume that sometime fairly soon the country will move into an insurgency phase, then there are perhaps ways in which we as a worldwide community could help in some small way.   However the main challenge is likely to be logistics, establishing lines of communication and delivery rather than the objects themselves.  As an example,  a simulated top section of the TM62M anti-tank mine is easy to make and might be more effective than placing dinnerplates in the road as has been recently reported.  Can provide more info if anyone interested.

Respondido : 06/03/2022 10:52 am
Shinobi42
(@shinobi42)
Active Member
RE: How this comunity can help Ukraine?

I would say this proposal is interesting, but the mine is too big for the most printers. My idea would be the green parrot mine: https://en.wikipedia.org/wiki/PFM-1

It was produced in large amounts in Russia and the USSR. 

I guess it would be easy to print and the following measures would work with the most printers: 

  • Length: 120 mm (4.7 in)
  • Width: 20 mm (0.79 in)
  • Height: 61 mm (2.4 in)

Unfortunately I am a noob in constructing things. Otherwise I would start to create the stl file for a first prototype. 

Respondido : 07/03/2022 8:05 am
ForSalisbury
(@forsalisbury)
New Member
RE: How this comunity can help Ukraine?

@shinobi42

Re: dimensions.   Attempting to transport full size replica munitions might be somewhat problematic!   The relevant Government at the point of shipment might have something to say on the matter.   

Here's a link to  a storage cap which bears a passing resemblance to the upper part only.   The dimensions are 136 dia x 40.  which should fit any printer.

https://www.thingiverse.com/thing:5275901/files

Respondido : 07/03/2022 3:23 pm
mmp
 mmp
(@mmp)
New Member
RE: How this comunity can help Ukraine?

We can help!

Go to:  https://whatt.io/alphaone/ukr/04:c7:4d:8a:83:72:80#support

Stl:  https://drive.google.com/file/d/1m2U71K_8A1AfQjo_AezEpvmVXV01x1kI/view

Clip, handle and buckle for Tourniquet. 0.2 mm layer height, 100% infill 6-7 walls. Support needed on buckle and clip. Only print in dark grey or black. Glory to Ukraine

Print as many as you can and send to:

Lostboyslab

Mobilgatan 8

235 39 Vellinge

Sweden

 

Thx to german Youtuber's at 3D Point for sharing!

 

 

Respondido : 09/03/2022 7:25 pm
Tommy_W me gusta
Shinobi42
(@shinobi42)
Active Member
RE: How this comunity can help Ukraine?

3D Point has just announced that the collection of the tourniquet parts is stopped so far. They will collect the already printed ones but the recommend not to print them further. 

Respondido : 17/03/2022 5:24 pm
Shinobi42
(@shinobi42)
Active Member
RE: How this comunity can help Ukraine?

https://3dprintingforukraine.com/  

Respondido : 18/03/2022 11:44 am
Compartir: