Has anyone received any orders from late April
 
Notifications
Clear all

Has anyone received any orders from late April  

Stránka 8 / 17
  RSS
GC
 GC
(@gc)
Active Member
RE: Has anyone received any orders from late April

@foobar

It does not make any sense... what did you do to get it before anyone else? just asking...

Napsal : 11/06/2020 3:11 pm
JoeinCal
(@joeincal)
Active Member
RE: Has anyone received any orders from late April

@morphias

It looks like Covid pretty much messed up their supply chain and available labor.  These guys were producing and shipping over 6000 printers per month during better times.  Prebuilt is heavily dependent on available labor so it is in a class by itself.  The MMU dependent orders hit some other problem which could be supply chain related.  They pulled the MMU upgrades for a while.  The remainder of orders are dependent on the supply chain.  I believe their objective is to maximize throughput.  Single sheet kit orders seem to go out first.  Add-ons could delay orders if the items are not available.  

There are anomalies with some orders.  Some folks got their orders shipped very quickly and it is hard to say why.  Other orders got screwed up due to IT issues such as with payment processing.  My add-on order (received already) got messed up that way.  Their system froze before payment on my order.  I came back a while later and added the items again to my cart and paid.  The next day my single order became two.  One was paid and the other not.  A CSR cancelled the unpaid order      

Napsal : 11/06/2020 3:21 pm
Foobar
(@foobar)
Active Member
RE: Has anyone received any orders from late April

@quasarpulsar

Based on the spreadsheet and some comments from others, it looks like a batch was prepared for shipment over the last few days that covered a period of time from late-April to early-May.  I think I was lucky in that my May 10th order was included in that batch and others that were in that window will also likely be seeing shipping confirmations soon if they haven't already.  Also, no extras in the order always helps.

Unrelated but anecdotal - this is the first Prusa printer that I'm receiving, but it's the fourth time I've ordered it.  I've been trying to get a Prusa since 2017 back when it was still the MK2 and every time it extended well past the estimated backlog date, I canceled the order.  The ETA on this one was 3-4 weeks when I placed the order and they just made it.  I was about to cancel again next week!

This post was modified před 4 years by Foobar
Napsal : 11/06/2020 3:24 pm
GC
 GC
(@gc)
Active Member
RE: Has anyone received any orders from late April

@foobar

ok i see... lucky one. I am about to cancel my order if nothing change the next 2 weeks. I ordered it the 13th of May, no extra just the orange kit.

Napsal : 11/06/2020 3:55 pm
doctortlr
(@doctortlr)
New Member
RE: Has anyone received any orders from late April

Ordered April 24 for assembled mk3s. Contacted support 3 times. Still on back order. Payment accepted day of order

Napsal : 11/06/2020 5:27 pm
JoeinCal
(@joeincal)
Active Member
RE: Has anyone received any orders from late April

@foobar

The other thing that might be going on here is rounding out bulk shipments to countries.  Prusa gets a very good shipping rate to the US.  They may be palletizing or containering shipments to the US that will be broken up once they hit FedEx's distribution system stateside.  This could account for them shipping some orders earlier than others based on where they are going.  Just a thought. 

Napsal : 11/06/2020 5:46 pm
zinefer
(@zinefer)
Active Member
RE: Has anyone received any orders from late April

Huzzah! I have shipped. 

Napsal : 11/06/2020 7:31 pm
IPIND 3D se líbí
MicroTek Support
(@microtek-support)
Active Member
RE: Has anyone received any orders from late April

I think the shipping delays have been compounded due to an increase in orders after  Joe stated in the Prusa stream that there is NO Mk4 any time soon. and when there is,  there would be an upgrade path.

Sure many will want the new XL despite the huge  price increase over the MK3. I think anybody on the fence about ordering a  MK3s model that is now several years old despite the slightly newer "s" has pulled the trigger on an order.  I certainly did. ( ordered 15/5/2020). 3-4 weeks delay at time of order. Thats 4 weeks tomorrow. Sadly I don't think I will see it any time soon.

Napsal : 11/06/2020 9:19 pm
IPIND 3D
(@ipind-3d)
Estimable Member
RE: Has anyone received any orders from late April

I agree it is definitely a result of a big spike in orders. I think it's more to do with tons of people being at home with nothing to do and other people who want to get on board with helping out to make face shields, etc, though.

Unfortunately, some reprehensible people have lied to jump the queue by telling support they desperately needed their printer to make medical supplies; but never actually made any. Support have stopped this now.

It still doesn't make sense that orders are being shipped out of order. There are still plenty of straight up basic kits with no extras that have not been shipped, yest orders from a week or more later have already been delivered. The post yesterday from @foobar is yet another example and it is infuriating for those of us that have been waiting longer and told "another week, another week". Absolutely nothing against @foobar - out of their control.

The shipping department at Prusa really need to get on top of this and ship orders in order.

Some people, like myself; desperately need the printer to get our businesses going and money coming in again now that some of the restrictions are being backed off. 

Time lines since the time of order have doubled and this has absolutely killed me as I now have a backlog of projects I cannot complete, install and bill for. I've paid for everything (10's of thousands of dollars just in parts, let alone all my labour), including the printer and shipping; and have no revenue from it. I don't have the option of billing my customers up front then telling them to wait 6-8 weeks.

Napsal : 11/06/2020 9:53 pm
Joey
 Joey
(@joey-2)
Estimable Member
RE: Has anyone received any orders from late April

I am now waiting 7 weeks, plain orange kit. I have not contacted Prusa.

Is someone saying that if I bitch and moan and give customer support a line of baloney I may get my order shipped in front of you? I can spin a pretty tall yarn.

Mk3 - 1X
Mk3S - 2X
2021 Hyundai Palisade
Wife - 1X

Napsal : 11/06/2020 10:06 pm
IPIND 3D
(@ipind-3d)
Estimable Member
RE: Has anyone received any orders from late April

@bob-h9

No mate. They canned the queue jumping after finding out the scumbags were boasting about it on social media.

Prusa should blacklist them IMHO and ban them from the eStore.

It's disgusting to profit or take advantage of the misery of others.

Napsal : 11/06/2020 10:11 pm
Foobar
(@foobar)
Active Member
RE: Has anyone received any orders from late April
Posted by: @morphias

It still doesn't make sense that orders are being shipped out of order. There are still plenty of straight up basic kits with no extras that have not been shipped, yest orders from a week or more later have already been delivered. The post yesterday from @foobar is yet another example and it is infuriating for those of us that have been waiting longer and told "another week, another week". Absolutely nothing against @foobar - out of their control.

Trust me, I'm taking no offense at all and I'm just as perplexed as everyone else as to why orders placed before mine are still pending, even though there's nothing special about the contents of their orders or in some cases even less complicated than mine (both sheet types on mine vs. the standard sheet on someone's placed a week before mine).   I understand the frustration (heck, I've canceled three other orders in the past 3 years because I didn't want to wait out the random queue any longer) and wish there was a better system in place.

Napsal : 11/06/2020 11:40 pm
Bossett
(@bossett)
Active Member
RE: Has anyone received any orders from late April
Posted by: @bob-h9

I am now waiting 7 weeks, plain orange kit. I have not contacted Prusa.

Is someone saying that if I bitch and moan and give customer support a line of baloney I may get my order shipped in front of you? I can spin a pretty tall yarn.

There are enough stories of people waiting ages only to find that their order was never properly placed/lodged - given that the order process sits in one state for ages, I would touch base with support just to confirm that it's all on track.

Napsal : 11/06/2020 11:53 pm
IPIND 3D
(@ipind-3d)
Estimable Member
RE: Has anyone received any orders from late April

WOOOOOOOOOOOOOOOT!!!!!   🙂

 

Just got the shipping notification.

 

Ordered 7th June.

Napsal : 12/06/2020 8:06 am
Bossett
(@bossett)
Active Member
RE: Has anyone received any orders from late April
Posted by: @morphias

Ordered 7th June.

Is that the right date? 5 days to ship?

Napsal : 12/06/2020 8:46 am
IPIND 3D
(@ipind-3d)
Estimable Member
RE: Has anyone received any orders from late April

@bossett

WHOOPS!

 

Outside the time limit to edit it too. 🙁   That is a total PITA!

 

Ordered 7th of May and shipped 12th June.

 

Trying to get admins to delete that post.

Napsal : 12/06/2020 8:51 am
Beat
 Beat
(@beat)
Active Member
RE: Has anyone received any orders from late April
Posted by: @beat
Posted by: @gero

Both of my orders got shipped, yey:D 
Ordered 16.apr MK3S orange&black with both sheets + MM2S and 27.apr MK3S orange&black with both sheets

 

Support told me my should ship this week, still waiting. Ordered 15.4 MK3S Orange with MMU2S.

Just received my shipping notice.

Napsal : 12/06/2020 10:46 am
CCJack
(@ccjack)
New Member
RE: Has anyone received any orders from late April

Ordered M3S kit, orange, txt bed, 9 May.

Shipped on 12 June. 

Take the google doc with a pinch of salt, you can't be sure if people are forgetting to update it once they receive their printer. 

 

Napsal : 12/06/2020 12:53 pm
GC
 GC
(@gc)
Active Member
RE: Has anyone received any orders from late April
Posted by: @morphias

@bossett

WHOOPS!

 

Outside the time limit to edit it too. 🙁   That is a total PITA!

 

Ordered 7th of May and shipped 12th June.

 

Trying to get admins to delete that post.

almost got a heart attack because of you :-p

Napsal : 12/06/2020 1:37 pm
IPIND 3D se líbí
JoeinCal
(@joeincal)
Active Member
RE: Has anyone received any orders from late April

A Prusa CSR just emailed me that my order will go out the end of next week or the week of June 22.  This what I estimated it to be after first seeing the spreadsheet. 

I am used to dealing with lead times stretching out.  There was a bridgeport type mill I ordered a few years back in December with a lead time of six weeks.  It was built by a high quality Taiwan manufacturer and rebadged by a US importer.  This was another pay up front deal.  The importer thought he could sell enough mills to fill a shipping container pretty quickly.  That stretched out way longer than he thought. I didn't get my mill until August of the following year.  The mill was everything I thought it would be and soon forgot about how long the wait was.   

 

This post was modified před 4 years by JoeinCal
Napsal : 12/06/2020 2:51 pm
Stránka 8 / 17
Share: