Filaments arriving without vacuum sealed
 
Notifications
Clear all

Filaments arriving without vacuum sealed  

  RSS
prusanewuser
(@prusanewuser)
Prominent Member
Filaments arriving without vacuum sealed

Hi, I bought three filaments about 1.5 months ago but two arrived without vacuum sealed. Prusa said that due to the cold weather in their city and the fluctuation of the temperature while it was shipped to North America, this caused "some air to be sucked into the vacuum seal and inflate it a little". They said that the quality team said this has no impact on the printing properties especially because silica was in the bag.

Is this really true?

Posted : 08/04/2021 1:26 am
cwbullet
(@cwbullet)
Member
RE: Filaments arriving without vacuum sealed

I have had a few rolls arrived without a vacuum seal.  

--------------------
Chuck H
3D Printer Review Blog

Posted : 08/04/2021 1:43 am
prusanewuser
(@prusanewuser)
Prominent Member
Topic starter answered:
RE: Filaments arriving without vacuum sealed
Posted by: @cwbullet

I have had a few rolls arrived without a vacuum seal.  

Anybody else?

They told me that filaments arriving without a vacuum seal is very unusual! As some of you may recall, last year I also got three rolls without a silica bag inside. When I reported the first roll without vacuum seal, they said that it is very unusual that I had issues with four filaments.  Now make it five.

Is the broken vacuum seal issue a QC problem or temperature fluctuation problem? They said that it is very difficult for them to prevent this from happening due to temperature differences while being shipped.

Posted : 08/04/2021 1:50 am
cwbullet
(@cwbullet)
Member
RE: Filaments arriving without vacuum sealed

@prusanewuser

I agree that it is rare.  

--------------------
Chuck H
3D Printer Review Blog

Posted : 08/04/2021 1:55 am
jsw
 jsw
(@jsw)
Famed Member
RE: Filaments arriving without vacuum sealed

Every spool of filament that I've ever ordered has been vacuum-sealed with a pack of silica gel.

Now loose-coil sample packs are different. Those I've received were not vacuum-sealed.

Posted : 08/04/2021 3:39 am
prusanewuser
(@prusanewuser)
Prominent Member
Topic starter answered:
RE: Filaments arriving without vacuum sealed

@jsw

Those I bought are not loose-coil samples.

Posted : 08/04/2021 4:10 am
cwbullet
(@cwbullet)
Member
RE: Filaments arriving without vacuum sealed

@jsw

I have to agree. Every role of filament that I have ever received had a bag of silicone with it also.

--------------------
Chuck H
3D Printer Review Blog

Posted : 08/04/2021 10:48 am
jsw
 jsw
(@jsw)
Famed Member
RE: Filaments arriving without vacuum sealed

Coincidentally, just a few minutes ago I opened a box of Amazon Basics dark gray filament that I had ordered for a project mostly to be done on the 'other' printer.

It was vacuum-sealed, but I was surprised that the little bag of silica gel was missing.

It's not brittle or gooey, and it loaded fine into the 'other brand' printer and it appears to be printing normally.

Posted : 17/04/2021 7:29 pm
Swiss_Cheese
(@swiss_cheese)
Noble Member
RE: Filaments arriving without vacuum sealed
Posted by: @prusanewuser

Hi, I bought three filaments about 1.5 months ago but two arrived without vacuum sealed. Prusa said that due to the cold weather in their city and the fluctuation of the temperature while it was shipped to North America, this caused "some air to be sucked into the vacuum seal and inflate it a little". They said that the quality team said this has no impact on the printing properties especially because silica was in the bag.

Is this really true?

sounds like BS to me. Straight up!

The Filament Whisperer

Posted : 18/04/2021 5:35 am
Swiss_Cheese
(@swiss_cheese)
Noble Member
RE: Filaments arriving without vacuum sealed

aslo how come people that have been posting here forever aren't including info like what kinda filament and so on?

The Filament Whisperer

Posted : 18/04/2021 5:37 am
Clemens M.
(@clemens-m)
Noble Member
RE: Filaments arriving without vacuum sealed

It is not a must have to get filament in vacuum sealed bags. In Austria and Germany is a company delivering quality filament - "HERZ" ( https://www.herz-filament.at/de/). Nearly all spools I received were without silika gel and bags described. It is my favorite PETG brand.

However - I can recommend a filament dryer !!!

Best regards, Clemens

Mini, i3 MK2.5S, i3 MK4, CClone (Eigenbau)

Posted : 18/04/2021 9:45 am
cwbullet
(@cwbullet)
Member
RE: Filaments arriving without vacuum sealed

I have made it a habit to put most spools in my dry box overnight.  I have noticed a noticable improvement in quality.  

--------------------
Chuck H
3D Printer Review Blog

Posted : 18/04/2021 11:39 am
cwbullet
(@cwbullet)
Member
RE: Filaments arriving without vacuum sealed
Posted by: @swiss_cheese
Posted by: @prusanewuser

Hi, I bought three filaments about 1.5 months ago but two arrived without vacuum sealed. Prusa said that due to the cold weather in their city and the fluctuation of the temperature while it was shipped to North America, this caused "some air to be sucked into the vacuum seal and inflate it a little". They said that the quality team said this has no impact on the printing properties especially because silica was in the bag.

Is this really true?

sounds like BS to me. Straight up!

From Prusa or the poster?

--------------------
Chuck H
3D Printer Review Blog

Posted : 18/04/2021 11:42 am
Clemens M.
(@clemens-m)
Noble Member
RE: Filaments arriving without vacuum sealed
Posted by: @cwbullet

I have made it a habit to put most spools in my dry box overnight.  I have noticed a noticable improvement in quality.  

I 100% agree with that - it makes absolutely sense to do so, but from time to time I am to lazy - then I get a print with poor quality and then I know it is time for the dryer.

Best regards, Clemens

Mini, i3 MK2.5S, i3 MK4, CClone (Eigenbau)

Posted : 18/04/2021 12:54 pm
cwbullet
(@cwbullet)
Member
RE: Filaments arriving without vacuum sealed

@clemens-m

No doubt that dry filament prints better.  

--------------------
Chuck H
3D Printer Review Blog

Posted : 18/04/2021 1:54 pm
Swiss_Cheese
(@swiss_cheese)
Noble Member
RE: Filaments arriving without vacuum sealed

@Charles

 

From Prusa of course, they have been packaging for years now and suddenly the problem is the weather, more likely faulty QC and a lame excuse to cover it. regardless the filament should be recoverable, NinjaTek does this as a common practice, just dry he filament.

The Filament Whisperer

Posted : 18/04/2021 2:53 pm
prusanewuser
(@prusanewuser)
Prominent Member
Topic starter answered:
RE: Filaments arriving without vacuum sealed

Prusa advertises that their filaments are vacuum sealed. I paid higher prices and high international shipping costs for their filaments expecting that they are vacuum sealed and work out of the box. Broke seal is their QC problem and they should allow me to return it. Instead, after wasting a week to perform many tests with photos and videos to show its failure, an agent continues to ask me to perform more tests to waste my time. 

Posted : 19/04/2021 1:19 am
Jerry
(@jerry)
Estimable Member
RE: Filaments arriving without vacuum sealed

As to wasting time...

Posted : 19/04/2021 2:21 pm
cwbullet
(@cwbullet)
Member
RE: Filaments arriving without vacuum sealed

@jerry

Point taken.  

--------------------
Chuck H
3D Printer Review Blog

Posted : 19/04/2021 3:48 pm
Share: