3D printed robotic arm
I am looking for a resource on a 3D printed robotic arm that will hopefully communicate with a microcontroller. I would like to use a touch screen to communicate with the microcontroller and then control the robot arm.
Youtube
Have a look at Skyentific https://www.youtube.com/channel/UCcgqJ1blFKqbC2bWGY4Opmg/videos
and James Bruton https://www.youtube.com/channel/UCUbDcUPed50Y_7KmfCXKohA/videos
for robotics hardware (motors, gearboxes)
Have a look at Dronebot Workshop https://www.youtube.com/channel/UCzml9bXoEM0itbcE96CB03w/videos and
Andreas Spiess https://www.youtube.com/channel/UCu7_D0o48KbfhpEohoP7YSQ/videos
for electronics in general
Having problems with bed adhesion every morning...
There are more then a few available on thingiverse.
The Filament Whisperer
Thank you very much for your reply!
Have a look at Skyentific https://www.youtube.com/channel/UCcgqJ1blFKqbC2bWGY4Opmg/videos
and James Bruton https://www.youtube.com/channel/UCUbDcUPed50Y_7KmfCXKohA/videos
for robotics hardware (motors, gearboxes)Have a look at Dronebot Workshop https://www.youtube.com/channel/UCzml9bXoEM0itbcE96CB03w/videos and
Andreas Spiess https://www.youtube.com/channel/UCu7_D0o48KbfhpEohoP7YSQ/videos
for electronics in general
Thank you very much for your reply!
Always glad to help !
Interested in your progress, so keep us updated !
Having problems with bed adhesion every morning...
Interesting project.
Subscribed. I would be interested in seeing your progress also.
--------------------
Chuck H
3D Printer Review Blog
GUI interface
Thank you guys, I have designed the robot arm GUI interface now, I am still thinking about which robot arm to print and which microcontroller to use.
Nice interface
Although a little odd with the "Up" pointing down and the "Left" pointing right...
Just kidding, I really like it !
I know, too much with all the different motors, gearboxes, mechanical constructions,... and too little money to build one of each...
Having problems with bed adhesion every morning...