PrusaConnect stops recording telemetry data
PrusaLink type (Raspberry Pi Zero / Pi 3 / Pi 4): Raspberry Pi 3B+
PrusaLink version: 0.8.1
Printer type Printer UUID: 854b6d8a-3963-4782-84fe-1b90d68734b8
Printer firmware version: 3.14.0-8066
PrusaSlicer version (if applicable): Version 2.8.0+win64
Description of the bug, including steps to reproduce (if possible):
Hi there,
I just started the Prusa experience by having an MK3S+. PrusaLink and PrusaConnect work like a charm - except for that one bug/flaw I recognized.
Like I stated, everything works fine - access, printer control, camera...but at some point, the telemetry data gets not longer recorded or displayed. I had this once and made my "experiments" responsible for it, so I did a fresh install of PrusaLink - after that the telemetry data was shown correctly. Now I've returned after 10 days vacation and started Pi/Printer up again and now the telemetry data is again blank.
The only thing I changed from the "bare" installation of PrusaLink was one line in the config.txt to use a physical button to shut down the pi as stated in the post I made here.
The rest of the setup is fully standard.
Thanks for the great support in this community and I wish you all a wonderful day 🙂
Best regards,
Simon
RE:
Additional Info: That's how the "telemetry" screen is looking like in my PrusaConnect (click for full size):
RE: PrusaConnect stops recording telemetry data
Fun thing: Today the telemetry data is recorded again - done nothing since yesterday.
Is there probably any "rule" in which order the Printer and the Pi needs to be booted up? I have a switched socket with which I turn on the printer and the Pi at the same time...
(Click on picture to enlarge)
RE:
Hello,
I have same trouble since update on latest version...
MK3S+, Raspberry Pi Zero 2W Everything by manual...
RE: PrusaConnect stops recording telemetry data
I had a 'similar' experience. Telemetry has always worked until a few days ago, when randomly it was "blank" on Connect. I didn't do anything different and today it's working again . . .
RE: PrusaConnect stops recording telemetry data
Yes, yesterday around midnight telemetry star working again...
I think I will be on Prusa connect server side...