Notifiche
Cancella tutti
Y Axis printing too long
Y is printing 1.295 mm too long on 4" long part. XZ OK.
I've tightened up the belts, added M92 Y98.74 below first instance of G90 in Custom G code and it made no difference.
I print 2" dia disk and it is .022" difference in dia when measured 45 deg apart on OD.
Postato : 26/03/2024 8:47 pm
Topic starter
answered:
RE: Y Axis printing too long
XY test failed. I reloaded back to factory. Now to get wifi to work again. It took some time before the config file would work.
Postato : 26/03/2024 10:00 pm