weird artifacts in some regions of the first layer
Hi everybody,
whenever I print something I get these lines sometimes in combination with bad bed adhesion
I have no clue if the printing community has a name for this - I tried searching but was not quite able to find help.
What I did find is that other posts were discussing skew in the assembly so I went ahead and got myself the bed level visualizer plugin.
this was the first result. So I loosened the 3 screws added some shiming and retightens everything. I also went ahead and tried everything explained in thins article:
https://help.prusa3d.com/en/article/xz-axis-skew-correction-mini_158518
The result afterwards was this:
I am not quite sure if what I am trying makes sense or if the problem is elsewhere completely.
hope somebody can help. thanks!
RE: weird artifacts in some regions of the first layer
Well... The shimming and skew adjustment let to this.
I am not happy 🙁 Quality was way better before tampering with the printer...
anybody who knows how to fix the original issues? I hope I will be able to revert back to them since they annoy me way less than what's happening now...