Notifications
Clear all
Prusa mini Assembly issue with XZ electronics box recess for foam pad
I am currently at step 8 of the foam pads installation and looking at the recess in the bottom of the electronics box it is not nicely finished off flat and even it is rough and uneven this does not seem normal as I am not sure how the pad is going to attach to this surface this way. 
Publié : 10/05/2020 12:21 am
RE: Prusa mini Assembly issue with XZ electronics box recess for foam pad
It's normal, I wouldn't worry about it.
Publié : 10/05/2020 12:30 pm
Topic starter
answered:
RE: Prusa mini Assembly issue with XZ electronics box recess for foam pad
It's normal, I wouldn't worry about it.
How is the foam pad going to stick to that properly though if it not flat as it will not have a flat surface to adhere to? won't this also possibly throw off the height of the arm? was yours like this ?
Publié : 10/05/2020 4:02 pm
RE: Prusa mini Assembly issue with XZ electronics box recess for foam pad
Doesn't matter, no, and yes.
Publié : 10/05/2020 4:18 pm
TechGuy2020 a aimé
RE: Prusa mini Assembly issue with XZ electronics box recess for foam pad
Yes its normal its because of bridging. Mine was like this too.
Original Prusa Mini + Smooth PEI
Prusa Slicer 2.6.0
Publié : 14/05/2020 7:43 pm
TechGuy2020 a aimé