Mini Plus Assembly Kit. Verification All good. First Layer calibration not so good.  

First layer calibration is a little off from the bed lines.

The printing is a little off from the bed guidelines..

Hi there, can someone help me aligning the z axis, as you can see from the first layer calibration, its a little off..

Mechnical issue

Check your Y-axis to make sure your parts are 100% assembled correctly.  

RE: Reply

Thanks, i might do that, i also think the removable plate bed was not positioned correcly thats why it was a bitt off. : ) I also talked to the chat support, they said i might be having some temperature room issues that affects the filament and first layer printing, it needs to be really dry. Thank you

Posted by: @cwbullet

Check your Y-axis to make sure your parts are 100% assembled correctly.  

possible.

Possible.  I can tell by that image.  

Posted by: @nelson

Thanks, i might do that, i also think the removable plate bed was not positioned correcly thats why it was a bitt off. : ) I also talked to the chat support, they said i might be having some temperature room issues that affects the filament and first layer printing, it needs to be really dry. Thank you

Posted by: @cwbullet

Check your Y-axis to make sure your parts are 100% assembled correctly.