Notifications
Clear all
Help with layer consistency
I'm getting good layer consistency on the left half on my mini, but not on the right side. The image is after a couple layers and you can see it's solid on the left, but not on the right. It looks like inconsistent layer height, but I'm using a bed sensor and the G29 code for mesh bed leveling. Is there something else I should be doing?
Opublikowany : 30/10/2022 4:20 pm
RE: Help with layer consistency
Mesh bed leveling does not compensate for larger skew. Look here: https://forum.prusa3d.com/forum/hardware-firmware-and-software-help/oh-no-were-skewed-prusa-mini-edition/ or here: https://github.com/s-taylor/prusa-mini-skew/blob/main/README.md
Nejsem zaměstnancem Prusa Research.
Opublikowany : 30/10/2022 8:43 pm