Notifications
Clear all
First start and first Layer problem
Hello,
First start of my mini+.
The calibration of the 1st layer does not work.
The nozzle makes its little journey, but nothing comes out of the nozzle.
However the wire is well loaded, and melted filament has flowed well to ask me if the color is ok.
If anyone can help me, thank you.
Boulbar
Posted : 30/09/2024 6:16 am
RE: First start and first Layer problem
https://help.prusa3d.com/article/clogged-nozzle-hotend-mini-mini_112011
https://help.prusa3d.com/article/cold-pull-mini_126399
See my GitHub and printables.com for some 3d stuff that you may like.
Posted : 01/10/2024 6:03 am
Topic starter
answered:
RE: First start and first Layer problem
...Resolved...
Posted : 02/10/2024 9:51 am
_KaszpiR_ liked