Notifications
Clear all
Awkward sounds while moving the Z axis
Hi Guys,
My pursa mini started to produce awkward sounds when it lowers the print head on the z axis. Can you please have a look at the video and give me hints how to resolve this issue?
Thanks!!IMG_7547
Publié : 16/09/2022 11:26 am
RE: Awkward sounds while moving the Z axis
Check if the linear bearing touches the alu profile on the right side. There is quite limited space between them.
wbr,
Karl
Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.
Publié : 16/09/2022 12:48 pm
RE: Awkward sounds while moving the Z axis
Check these posts. They may reflect what you are seeing and how to solve it.
Publié : 17/09/2022 4:27 am