Deutsch
Foren
English forum
Original Prusa MINI & MINI+
Assembly and first prints troubleshooting
Awkward sounds while moving the Z axis
 
Benachrichtigungen
Alles löschen

Awkward sounds while moving the Z axis  

    Letzter Beitrag
  RSS
wdietl
 wdietl
(@wdietl)
New Member
Awkward sounds while moving the Z axis

Hi Guys,

My pursa mini started to produce awkward sounds when it lowers the print head on the z axis. Can you please have a look at the video and give me hints how to resolve this issue?

Thanks!!IMG_7547

Veröffentlicht : 16/09/2022 11:26 am
karl-herbert
 karl-herbert
(@karl-herbert)
Illustrious Member
RE: Awkward sounds while moving the Z axis

Check if the linear bearing touches the alu profile on the right side. There is quite limited space between them.

wbr,

Karl

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Veröffentlicht : 16/09/2022 12:48 pm
languer
 languer
(@languer)
Estimable Member
RE: Awkward sounds while moving the Z axis

Check these posts. They may reflect what you are seeing and how to solve it.

https://forum.prusa3d.com/forum/hardware-firmware-and-software-help/noisy-z-when-head-is-near-print-plate/

Veröffentlicht : 17/09/2022 4:27 am
  Alle Forumsthemen
  Vorheriges Thema
Nächstes Thema  
Teilen: