Notifications
Clear all

Awkward sounds while moving the Z axis  

  RSS
wdietl
(@wdietl)
New Member
Awkward sounds while moving the Z axis

Hi Guys,

My pursa mini started to produce awkward sounds when it lowers the print head on the z axis. Can you please have a look at the video and give me hints how to resolve this issue?

Thanks!!IMG_7547

Posted : 16/09/2022 11:26 am
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Awkward sounds while moving the Z axis

Check if the linear bearing touches the alu profile on the right side. There is quite limited space between them.

wbr,

Karl

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Posted : 16/09/2022 12:48 pm
languer
(@languer)
Estimable Member
RE: Awkward sounds while moving the Z axis

Check these posts. They may reflect what you are seeing and how to solve it.

https://forum.prusa3d.com/forum/hardware-firmware-and-software-help/noisy-z-when-head-is-near-print-plate/

Posted : 17/09/2022 4:27 am
Share: