Prusa3D Forum

Benachrichtigungen

Alles löschen

taxilian

Gruppe: Registriert

Beigetreten: 2016/10/20

Active Member

	If you look really closely at the black piece that broke off... Im Forum Others (Archive)	Vor 9 years
	This is my third print at that temperature and the last two ... Im Forum Others (Archive)	Vor 9 years
	I haven't made any changes; I am using the prusa supplied co... Im Forum Others (Archive)	Vor 9 years
	I've now run a hardened nozzle in two different printers for... Im Forum Others (Archive)	Vor 9 years
	Hi Chris, So the heat issue I've been having it turns out i... Im Forum Others (Archive)	Vor 9 years
	While it did take me a bit to dial it in, it's been working ... Im Forum Others (Archive)	Vor 9 years
	So I installed the printbite from mutley (bought on flex3dri... Im Forum Others (Archive)	Vor 9 years
	For the most part I haven't had any issue with the parts ins... Im Forum Others (Archive)	Vor 9 years
	I had a similar issue and ended up having to heat up the blo... Im Forum Others (Archive)	Vor 9 years
	I went for months with no idea why my old printer wasn't wor... Im Forum Others (Archive)	Vor 9 years
	That's an interesting perspective. I consider a rpi running... Im Forum Others (Archive)	Vor 9 years
	In my experience on the Mk2 (and naturally if it's in my exp... Im Forum Others (Archive)	Vor 9 years
	If you do try a z calibration be ready to kill it... I am pr... Im Forum Others (Archive)	Vor 9 years
	When you say that printbite may cause the probe not to work.... Im Forum Others (Archive)	Vor 9 years
	I've not tried this personally (haven't printed PETG recentl... Im Forum Others (Archive)	Vor 9 years
	You really need to remove the original; adding an extra laye... Im Forum Others (Archive)	Vor 9 years
	My problem (I was the OP) is resolved now; I had measured th... Im Forum Others (Archive)	Vor 9 years
	Calibration... problem? sorta? Im Forum Others (Archive)	Vor 9 years
	I had the same issue; I checked cables, swapped them, etc fo... Im Forum Prusa i3 kit (Archive)	Vor 9 years

Forums-Statistiken

585 Foren

68.2 K Themen

477.4 K Beiträge

10 Online

75.9 K Mitglieder

Letzter Beitrag: Nestabilní PrusaSlicer Unser neuestes Mitglied: mnentwig Neueste Beiträge Ungelesene Beiträge Schlagwörter

Forum Icons: Das Forum enthält keine ungelesenen Beiträge Das Forum enthält ungelesene Beiträge

Themen-Icons: Unbeantwortet Beantwortet Aktiv Heiß Oben angepinnt Nicht genehmigt Gelöst Privat Geschlossen