Notifications
Clear all
Tailsld
Grupa: Zarejestrowany
Dołączył: 2017/10/13
Active Member
1
| Wash off with water , dry and clean with isopropyl alcohol | 4 years temu | |
| Christopher...i usually keep the mmu off for general printin... | 4 years temu | |
| HelloI have a mk3s mmu2s printed upgraded from a mk3. The pr... | 4 years temu | |
| Weird x/y axis shift | 4 years temu | |
| 30 hrs in o a 60 HR Alanis dragon...mmu is flashing all 5 fo... | 4 years temu | |
| Okay...after much time and effort I have the mmu2s working s... | 4 years temu | |
| Thanks JSW I contacted them waiting for response. | 4 years temu | |
| If a moderator reads this can you tell tech support to email... | 4 years temu | |
| okay I completely dis-assembled and re-assembled the mmu... ... | 4 years temu | |
| Not a slicer problem...have not done a print yet...still wor... | 4 years temu | |
| Okay....completely dismantled, and reassembled...read all th... | 4 years temu | |
| Where do i begin...re-calibrated everything, took the unit 1... | 4 years temu | |
| Prusa bombed on the mmu2s | 4 years temu |