Benachrichtigungen
Alles löschen
Starlynk
Starlynk
Gruppe: Registriert
Beigetreten: 2017/02/10
Trusted Member
3
Something I noticed in the picture you supplied is the Extru...

Im Forum Others (Archive)

Vor 8 years
Well, the clicking noise is most likely the extruder gear tr...

Im Forum Others (Archive)

Vor 8 years
Agreed, unless it needs to be moved, best to keep from movin...

Im Forum Print tips (Archive)

Vor 8 years
Strange, I use Hatchbox Red PLA and haven't had that issue. ...

Im Forum Print tips (Archive)

Vor 8 years
ABS you will normally need to lower your Live-Z by another ....

Im Forum Print tips (Archive)

Vor 8 years
That looks like your nozzle is just a hair too close to the ...

Im Forum Print tips (Archive)

Vor 8 years
Same here... read the 3.0.10 notes and it was supposed to fi...

Im Forum Prusa i3 kit (Archive)

Vor 8 years
I hear ya, I've experience the nozzle going into the bed and...

Im Forum Software (Archive)

Vor 8 years
The way that I set my PINDA is to turn the unit off and manu...

Im Forum Prusa i3 kit (Archive)

Vor 8 years
On mine, the threaded Z-axis rods are out about 1-2mm above ...

Im Forum Others (Archive)

Vor 8 years
The problem with the current iteration of the ColorChange is...

Im Forum Software (Archive)

Vor 8 years
The PEI on the bed doesn't need any special treatment. I use...

Im Forum Others (Archive)

Vor 8 years
Check out my post here: The manual has the bug, not the f...

Im Forum Prusa i3 kit (Archive)

Vor 8 years
Don't have to worry about the Rambo case, it doesn't attach ...

Im Forum Others (Archive)

Vor 8 years
Also, don't forget about doing the Bed Leveling calibrations...

Im Forum Prusa i3 kit (Archive)

Vor 8 years
I switch between ABS and PLA often and do not have an enclos...

Im Forum Others (Archive)

Vor 8 years
If all you are having is a wiring issue due to a broken wire...

Im Forum Others (Archive)

Vor 8 years
Not sure if you have played with the Server part yet, but so...

Im Forum Print tips (Archive)

Vor 8 years
Not recommended to not have the PSU attached to the unit. Th...

Im Forum Others (Archive)

Vor 8 years
That picture looks much better. Your previous one was showin...

Im Forum Print tips (Archive)

Vor 8 years
Seite 3 / 4
Teilen: