Notifiche
Cancella tutti
SG Newb Rider
Gruppo: Registrato
Registrato: 2023/01/16
Trusted Member
3
| definitely too high, it should be a smooth layer with no gap... | 3 years fa | |
| I agree that if there's no upgrade path then it won't be a M... | 3 years fa | |
|
Is thermal error during hot tightening normal? Nel forum Hardware, firmware and software help |
3 years fa | |
| Shrink the XL 25% and call it the MK4 | 3 years fa | |
| Voted for neither. Bambu and Prusa runs into the same unavai... | 3 years fa | |
| just a shot in the dark, but is your heatsink fan running du... | 3 years fa | |
|
thanks, great information. I assumed my layer height setting... Nel forum PrusaSlicer |
3 years fa | |
| Thanks, as you mentioned, it was a problem with the out of b... | 3 years fa | |
|
Thanks for the heads up! Nel forum Hardware, firmware and software help |
3 years fa | |
|
Mk8 nozzle on the Mk3S Nel forum Hardware, firmware and software help |
3 years fa | |
| those are seams, where the extrusion start/ends for a layer,... | 3 years fa | |
| Give us regular or glass build plate options | 3 years fa | |
|
Variable Layer Height greatly increases print time Nel forum PrusaSlicer |
3 years fa |
Pagina 3 / 3
Precedente