Avisos
Vaciar todo
Nikolai
Grupo: Registrado
Registrado: 2016/11/09
Noble Member
3
|
Do you really want this? I would suggest to make it reliable... En el foro Others (Archive) |
hace 8 years | |
|
It almost looks like a layer shift. If you want me to provid... En el foro Others (Archive) |
hace 8 years | |
|
Good luck on removing the plastic. Take your time and it wil... En el foro Others (Archive) |
hace 8 years | |
|
Most likely you squish the first layer too much on the bed. ... En el foro Others (Archive) |
hace 8 years | |
|
It's all about the math and compatibility. With all the diff... En el foro Print tips (Archive) |
hace 8 years | |
|
I got this one from Amazon
So far the smell reduced drastic... En el foro Improvements (Archive) |
hace 8 years | |
|
Second over extrusion. As already suggested try to lower the... En el foro Others (Archive) |
hace 8 years | |
|
It looks really scary.
I would also not recommend to start ... En el foro Others (Archive) |
hace 8 years | |
|
There are multiple issues possible. I had a strange one whic... En el foro Others (Archive) |
hace 8 years |
Página 118 / 118
Anterior