Prusa3D Forum

Benachrichtigungen

Alles löschen

Maxwell

Gruppe: Registriert

Beigetreten: 2018/01/24

Active Member

	Good feedback! I was excited about microcenter as there’s on... Im Forum Others (Archive)	Vor 7 years
	Stateside filament options Im Forum Others (Archive)	Vor 7 years
	Thank you for the z level file. It was fantastic! And thank... Im Forum Others (Archive)	Vor 7 years
	Alright. I did some diailing in before this obviously but he... Im Forum Others (Archive)	Vor 7 years
	OK the bed is clean, then we concentrate on the Z level. Pru... Im Forum Others (Archive)	Vor 7 years
	It looks like that the part has been loosened during printin... Im Forum Others (Archive)	Vor 7 years
	Last print results. Wire for reference. Im Forum Others (Archive)	Vor 7 years
	Loosen a little bit on the screw that holds the sensor. Then... Im Forum Others (Archive)	Vor 7 years
	Your printer is assembled which is what you paid for. You ar... Im Forum Others (Archive)	Vor 7 years
	Sensor pinda white? ... mine is black, how strange I notic... Im Forum Others (Archive)	Vor 7 years
	Move your Z all the way to the top, both sides should hit th... Im Forum Others (Archive)	Vor 7 years
	Move your Z all the way to the top, both sides should hit th... Im Forum Others (Archive)	Vor 7 years
	And looks like the bed is significantly off level. Left si... Im Forum Others (Archive)	Vor 7 years
	No zip ties here. But I used on I had on hand. I scuffed the... Im Forum Others (Archive)	Vor 7 years
	No zip ties here. But I used on I had on hand. I scuffed the... Im Forum Others (Archive)	Vor 7 years
	So here’s the best I can achieve without physical adjustment... Im Forum Others (Archive)	Vor 7 years
	Thanks Sean. I will try this. I had not previously done this... Im Forum Others (Archive)	Vor 7 years
	New user issues Im Forum Others (Archive)	Vor 7 years

Forums-Statistiken

559 Foren

62.9 K Themen

442.9 K Beiträge

20 Online

67.7 K Mitglieder

Letzter Beitrag: Print Settings: Unser neuestes Mitglied: pinklemonade Neueste Beiträge Ungelesene Beiträge Schlagwörter

Forum Icons: Das Forum enthält keine ungelesenen Beiträge Das Forum enthält ungelesene Beiträge

Themen-Icons: Unbeantwortet Beantwortet Aktiv Heiß Oben angepinnt Nicht genehmigt Gelöst Privat Geschlossen