English
Forums
Members
KC1SA
Activity
 
Notifications
Clear all
KC1SA
KC1SA
Group: Registered
Joined: 2021/03/31
Eminent Member
2
Profile Activity
I have the A30T working very well with Prusaslicer 2.4.1. Ch...

In forum PrusaSlicer

 2 years ago
Failure to retract occationally

In forum PrusaSlicer

 2 years ago
G1 X166.224 Y166.432 E0.00872G1 X166.650 Y166.475 F3600.000M...

In forum PrusaSlicer

 3 years ago
Is there a post processing script to change all the G1 to G0...

In forum PrusaSlicer

 3 years ago
this profile I tweaked from one I found on forums for anothe...

In forum PrusaSlicer

 3 years ago
Here's a small example. Pausing is very noticiable at layer...

In forum PrusaSlicer

 3 years ago
@bobstro If I turn off retraction, yes very messy print but ...

In forum PrusaSlicer

 3 years ago
@bobstro Using Repetier Server, which I thought it may be a ...

In forum PrusaSlicer

 3 years ago
@bobstro Not wiping. Seems to occur when jumping across an ...

In forum PrusaSlicer

 3 years ago
@bobstro In my case I have small pauses when printing. The ...

In forum PrusaSlicer

 3 years ago
Still tweaking slicer settings

In forum PrusaSlicer

 3 years ago
Still tweaking the slicer as we speak. Appreciate the help.

In forum PrusaSlicer

 3 years ago
@swiss_cheese Good catch on extruder 3. I changed the profi...

In forum PrusaSlicer

 3 years ago
@swiss_cheese Here's the project saved and zipped. Very sim...

In forum PrusaSlicer

 3 years ago
I don't believe it's a gcode issue. I experiemented with an...

In forum PrusaSlicer

 3 years ago
Unselected tower generation leaving everything else intact a...

In forum PrusaSlicer

 3 years ago
I edited out the G4 S0 commands and it made no difference. ...

In forum PrusaSlicer

 3 years ago
I looked through the gcode and spotted G4 (Dwell) commands. ...

In forum PrusaSlicer

 3 years ago
@diem Yes, same type and temp; PLA 204C

In forum PrusaSlicer

 3 years ago
Single Object, Multiple part object printing

In forum PrusaSlicer

 3 years ago
Share: