Notifications
Clear all
Jon M
Grupa: Zarejestrowany
Dołączył: 2021/07/06
Active Member
1
| Hotspots (or coldspots) on HeatBed | 3 years temu | |
| nope, sounds good. | 3 years temu | |
| Finally success after resetting PINDA, calibrated z to -1.3 ... | 4 years temu | |
| Top side 49C0F23F-6092-4949-A8DC-DAE3541BB51B.jpeg | 4 years temu | |
| Adjusted z to -0.205, looked nice and flat at 12x , then got... | 4 years temu | |
| So I cleaned the plate with soap and hot water, adjusted the... | 4 years temu | |
| RE: Struggling with first layer, print slipping. Odd Live Z ... | 4 years temu | |
| @bogdanh I'm down to -1.90 and still having issues with non-... | 4 years temu | |
| Next pass was at 75% speed and hotbed temp of 80 deg C. Thi... | 4 years temu | |
| So, after searching the forum, I made 2 changes, 75% speed a... | 4 years temu | |
| I had the same thing happen, but in an odd order. Got it to... | 4 years temu |