Avisos
Vaciar todo
john.w12
Grupo: Registrado
Registrado: 2016/12/31
Active Member
1
|
I simply heat up to what ever temp to 255 and load and unloa... En el foro Prusa i3 kit (Archive) |
hace 8 years | |
|
I agree that you are too close to the bed when printing and ... En el foro Others (Archive) |
hace 8 years | |
|
I had this issue but fixed it with a magnetic shim.
Check... En el foro Others (Archive) |
hace 8 years | |
|
Where I have seen this is in relations to where the 'infill'... En el foro Others (Archive) |
hace 8 years | |
|
My experience thus far is that ABS likes to stick to things ... En el foro Print tips (Archive) |
hace 8 years | |
|
I cut a new sponge into 6 parts, four for the feet, and two ... En el foro Others (Archive) |
hace 8 years | |
|
I think some of this is going to depend on the ABS you are u... En el foro Print tips (Archive) |
hace 8 years | |
|
Hey there guys,
I had the exact same problem as what you de... En el foro Others (Archive) |
hace 8 years |