Prusa3D Forum

Benachrichtigungen

Alles löschen

john.n3

Gruppe: Registriert

Beigetreten: 2016/08/29

Active Member

	just turn the fan down to about 75% Im Forum Others (Archive)	Vor 8 years
	UPDATE prusa support have asked me to send back the printer... Im Forum Others (Archive)	Vor 8 years
	THANKS PJR i contacted support and they recon you are corre... Im Forum Others (Archive)	Vor 8 years
	with the heater connector unplugged from the pcb the heater ... Im Forum Others (Archive)	Vor 8 years
	hi guys ok well i have had more time to play with the mk2 ... Im Forum Others (Archive)	Vor 8 years
	yes its does say this in the help pages: "All MK2 heaters a... Im Forum Others (Archive)	Vor 8 years
	thanks for all your help guys i feel like I'm a expert now... Im Forum Others (Archive)	Vor 8 years
	hi 3d yes all the points you made are correct and i agree ... Im Forum Others (Archive)	Vor 8 years
	hi guys ok i installed the latest firmware slowing the fan... Im Forum Others (Archive)	Vor 8 years
	hi 3d yes my firmware version is 3.0.7 so i could try the ... Im Forum Others (Archive)	Vor 8 years
	i have had a good look at the heater and it looks in the hou... Im Forum Others (Archive)	Vor 8 years
	and here is pic of inside the fail part Im Forum Others (Archive)	Vor 8 years
	hi 3D i only got the printer a couple days ago...so i expec... Im Forum Others (Archive)	Vor 8 years
	UPDATE i wanted to try the supplied sd card models again t... Im Forum Others (Archive)	Vor 8 years
	brand new factory build Mk2 has Thermal Runaway Error Im Forum Others (Archive)	Vor 8 years

Forums-Statistiken

535 Foren

60.7 K Themen

432.6 K Beiträge

14 Online

65.7 K Mitglieder

Forum Icons: Das Forum enthält keine ungelesenen Beiträge Das Forum enthält ungelesene Beiträge

Themen-Icons: Unbeantwortet Beantwortet Aktiv Heiß Oben angepinnt Nicht genehmigt Gelöst Privat Geschlossen