AJS – Aktywność – Prusa3D Forum

Notifications

Clear all

AJS

Grupa: Zarejestrowany

Dołączył: 2017/01/10

Noble Member

	You are thinking correct, and your design looks great at low... In forum Others (Archive)	8 years temu
	I might also suggest upgrading to a Raspberry Pi with OctoPi... In forum Others (Archive)	8 years temu
	Poor layer adhesion can also be a result of a bad temperatur... In forum Others (Archive)	8 years temu
	Is your PINDA probe security mounted? If it moves, then tha... In forum Others (Archive)	8 years temu
	That first layer looks good to me. Certainly not a first la... In forum Others (Archive)	8 years temu
	I would check the connections to the bed and the cable from ... In forum Others (Archive)	8 years temu
	Also check belts and motor as mentioned above. Even though... In forum Others (Archive)	8 years temu
	Is the cable bundle that comes out the back of the extruder ... In forum Others (Archive)	8 years temu
	I have no time to go back and forth and do an A/B comparison... In forum Improvements (Archive)	8 years temu
	Does it have this bad behavior on one of the included files?... In forum Others (Archive)	8 years temu
	Is this a packaged gcode, or one you sliced yourself? Are y... In forum Others (Archive)	8 years temu
	Does this happen on multiple filament rolls, or just this on... In forum Others (Archive)	8 years temu
	Thanks all! In forum Others (Archive)	8 years temu
	Sam, A picture is worth a thousand words... I did have som... In forum Others (Archive)	8 years temu
	Looks like under extrusion to me. Three things to try: 1) C... In forum Others (Archive)	8 years temu
	Variable Fill Density In forum Others (Archive)	8 years temu
	Your description reminds me of this post: The problem the... In forum Others (Archive)	8 years temu
	Also extruder parts with probe holder currently being design... In forum Improvements (Archive)	8 years temu
	OK, so that GCode starts with extruder 1, prints the purge l... In forum Others (Archive)	8 years temu
	The nozzle does NOT affect leveling. That is all done with ... In forum Improvements (Archive)	8 years temu

Strona 49 / 51 Wstecz Następny

Statystyki Forum

585 Fora

68.3 K Tematy

478.4 K Posty

12 Online

76.2 K Członkowie

Ostatni Post: Prusa Core one clicking while purging / printing and uneven purging Najnowszy użytkownik:: rhn Recent Posts Unread Posts Tags

Forum Icons: Forum contains no unread posts Forum contains unread posts

Ikony tematu: Not Replied Odwpowiedzi Aktywny Gorący Przyklejony Unapproved Rozwiązany Private Zamknięte