AJS – Aktivität – Prusa3D Forum

Benachrichtigungen

Alles löschen

AJS

Gruppe: Registriert

Beigetreten: 2017/01/10

Noble Member

	You are thinking correct, and your design looks great at low... Im Forum Others (Archive)	Vor 8 years
	I might also suggest upgrading to a Raspberry Pi with OctoPi... Im Forum Others (Archive)	Vor 8 years
	Poor layer adhesion can also be a result of a bad temperatur... Im Forum Others (Archive)	Vor 8 years
	Is your PINDA probe security mounted? If it moves, then tha... Im Forum Others (Archive)	Vor 8 years
	That first layer looks good to me. Certainly not a first la... Im Forum Others (Archive)	Vor 8 years
	I would check the connections to the bed and the cable from ... Im Forum Others (Archive)	Vor 8 years
	Also check belts and motor as mentioned above. Even though... Im Forum Others (Archive)	Vor 8 years
	Is the cable bundle that comes out the back of the extruder ... Im Forum Others (Archive)	Vor 8 years
	I have no time to go back and forth and do an A/B comparison... Im Forum Improvements (Archive)	Vor 8 years
	Does it have this bad behavior on one of the included files?... Im Forum Others (Archive)	Vor 8 years
	Is this a packaged gcode, or one you sliced yourself? Are y... Im Forum Others (Archive)	Vor 8 years
	Does this happen on multiple filament rolls, or just this on... Im Forum Others (Archive)	Vor 8 years
	Thanks all! Im Forum Others (Archive)	Vor 8 years
	Sam, A picture is worth a thousand words... I did have som... Im Forum Others (Archive)	Vor 8 years
	Looks like under extrusion to me. Three things to try: 1) C... Im Forum Others (Archive)	Vor 8 years
	Variable Fill Density Im Forum Others (Archive)	Vor 8 years
	Your description reminds me of this post: The problem the... Im Forum Others (Archive)	Vor 8 years
	Also extruder parts with probe holder currently being design... Im Forum Improvements (Archive)	Vor 8 years
	OK, so that GCode starts with extruder 1, prints the purge l... Im Forum Others (Archive)	Vor 8 years
	The nozzle does NOT affect leveling. That is all done with ... Im Forum Improvements (Archive)	Vor 8 years

Seite 49 / 51 Vorherige Nächstes

Forums-Statistiken

585 Foren

68.3 K Themen

478.4 K Beiträge

12 Online

76.2 K Mitglieder

Letzter Beitrag: Prusa Core one clicking while purging / printing and uneven purging Unser neuestes Mitglied: rhn Neueste Beiträge Ungelesene Beiträge Schlagwörter

Forum Icons: Das Forum enthält keine ungelesenen Beiträge Das Forum enthält ungelesene Beiträge

Themen-Icons: Unbeantwortet Beantwortet Aktiv Heiß Oben angepinnt Nicht genehmigt Gelöst Privat Geschlossen