RPi camera for OctoPrint with easy focus and M12 changeable lens

Dernier message

RSS

Daryl

(@daryl-2)

Trusted Member

RPi camera for OctoPrint with easy focus and M12 changeable lens

The 'standard' Raspberry Pi camera is difficult / impossible to focus. Thought I would share a nice upgrade that is easy to focus down to just a few inches.

RPi Camera, close focus, interchangeable lenses

I printed this case with only minor mods for the ribbon cable.

Publié : 04/05/2021 1:09 am

Schnoidz a aimé

Dan Rogers

(@dan-rogers)

Noble Member

RE: RPi camera for OctoPrint with easy focus and M12 changeable lens

For the original RPI camera, there is a tool you can print to be able to change focus. It's around here somewhere. But cool upgrade there.

Publié : 04/05/2021 6:32 am

cwbullet

(@cwbullet)

Membre

RE: RPi camera for OctoPrint with easy focus and M12 changeable lens

Posted by: @daryl-2

The 'standard' Raspberry Pi camera is difficult / impossible to focus. Thought I would share a nice upgrade that is easy to focus down to just a few inches.

RPi Camera, close focus, interchangeable lenses

I printed this case with only minor mods for the ribbon cable.

Does it work well? I had a similar model but the ribbon cable topped working at a month.

--------------------
Chuck H
3D Printer Review Blog

Publié : 07/05/2021 9:52 am

Statistiques du forum

565 Forums

63.9 K Sujets

447.7 K Messages

19 En-ligne

69.5 K Membres

Le dernier des messages: Xl extruder stops Notre nouveau membre: SilenceDIY Messages récents Messages non lus Balises

Icones du forum: Le forum ne contient pas de messages non lus Le forum contient des messages non lus

Icones du sujet: Sans réponse Repondu Actifs Au top Épinglé Non approuvé Résolu Privé Fermé