Notifications
Clear all
Power for light from MK4
I have an idea to make a simple working led light for MK4.
Please is it possible to get power from the printer? If yes, where and how much energy (power/Watt) can i take?
Publié : 18/12/2023 2:12 pm
RE: Power for light from MK4
Yes, you can draw power from the printer's psu.
The psu is rated at 24 vdc and can supply up to 10 amps.
I wouldn't draw more than about 2 amps (48 watts) from the psu, as the printer needs most of the power it can supply.
The power connections (screw terminals) are labeled on the power supply.
Publié : 18/12/2023 10:31 pm
Zappes a aimé
RE: Power for light from MK4
I can confirm that. I have a filtration system and rougly one meter of LED strip running directly off the PSU, no problems whatsoever.
Publié : 19/12/2023 7:59 am
Topic starter
answered:
RE: Power for light from MK4
Thanks a lot both of you !
Publié : 19/12/2023 8:30 am