Error codes  

RE: Error codes

Posted by: @mnentwig

[...] unless the Signature Oak wouldn't support MMU3 which is Prusa's latest-and-greatest offering in multimaterial printing and would be a real shame.

🙂

Just follow the Signature Oak MMU upgrade guide, with handy templates for making the required jigsaw cuts.👍

Seriously though, there is no need for an MMU upgrade for the Signature Oak. That machine is not meant for printing anyway. But does it come with a proper fabric-sleeved power cable??

RE: Error codes

Posted by: @jurgen-7

Just follow the Signature Oak MMU upgrade guide, with handy templates for making the required jigsaw cuts.👍

Seriously though, there is no need for an MMU upgrade for the Signature Oak. That machine is not meant for printing anyway. But does it come with a proper fabric-sleeved power cable??

let's stay clear of jigsaws or this might turn into a splatter movie. Well, a lame one.

Not jamming the umbilical between head and X axis stepper would be a start towards a better future [2].

[1] The missing error code

[2] Or am I seeing things? (my write-up)

[1] https://forum.prusa3d.com/forum/hilfe-zur-hardware-firmware-und-software-3/mk4s-mmu3-keine-funktion-mehr/#post-775577

[2] https://forum.prusa3d.com/forum/user-mods/core-one-chopstick-mod-umbilical-x-motor-jamming/

RE:

Posted by: @jurgen-7

Posted by: @mnentwig

[...] unless the Signature Oak wouldn't support MMU3 which is Prusa's latest-and-greatest offering in multimaterial printing and would be a real shame.

🙂

Just follow the Signature Oak MMU upgrade guide, with handy templates for making the required jigsaw cuts.👍

Seriously though, there is no need for an MMU upgrade for the Signature Oak. That machine is not meant for printing anyway. But does it come with a proper fabric-sleeved power cable??

Probably a 99.9999% oxygen free copper mains cable. If I had one I would only print wood-fill PLA with it. Seems right otherwise.