Wall thickness tuning
Hi,
I must be overlooking something obvious, please help me out. I rebuilt my home design Core-XY printer (it was worn out after 4 years of printing), better hot-end, and now I am recallibrating everything. I am stuck on the wall thickness. In S3D I read what the slicer believed the wall thickness was, I measured what is really was (single wall test print) and adjusted the extruding multiplier accordingly. In PrusaSlicer and SuperSlicer (yeah, I have that variation on the theme, too, but little support) I can find the extruder multiplier field, but I cannot find where is written what the Slicer believes it is printing. I can find all the percentages and a nice picture in the explanation. Please share with me where I can find what the slicer thinks it is printing, so I can compare to my measured value.
Cheers,
Hugo
RE: Wall thickness tuning
look at extrusion width settings
this table is for a 0.6mm nozzle.
a 0.4mm nozzle normally uses o.45 mm perimeters.
regards Joan
I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK
RE: Wall thickness tuning
Ah, thanks. And sorry for the late reply. I have all percentages, there, overlooked the fact that you can fill in mm as well. All new stuff to me.
Cheers,
Hugo