Trying to get My Taz 6 working with Slicer Help Please
 
Notifications
Clear all

Trying to get My Taz 6 working with Slicer Help Please  

Strona 2 / 2
  RSS
Mikolas Zuza
(@mikolas-zuza)
Member Moderator
RE: Trying to get My Taz 6 working with Slicer Help Please

Hey @sembazuru,
thanks for the profiles!

We do not have Taz Mini or Taz 6 here in the Prusa office, but I would love to include your profiles in PrusaSlicer 2.2.

It sounds like you tested them, do you think they're in OK state to be included?

This post was modified 5 years temu by Mikolas Zuza
Opublikowany : 03/03/2020 3:18 pm
Mikolas Zuza
(@mikolas-zuza)
Member Moderator
RE: Trying to get My Taz 6 working with Slicer Help Please

Here's the aligned MINI print bed:
https://drive.google.com/file/d/1AeB3uBOHXUbHO2_NgviDI5XnETdD6-C6/view?usp=sharing

Opublikowany : 03/03/2020 3:33 pm
Sembazuru
(@sembazuru)
Prominent Member
RE: Trying to get My Taz 6 working with Slicer Help Please

Thanx for updating the MINI print bed model with a corrected origin. I still hadn't gotten around to doing that for the library.

The profile I posted is for both printers with the Aerostruder replacement extruder add-on applied. I don't know what if any changes to the profiles the Aerostruder needs vs. the stock extruder for those printers. I think they are a fine first-order attempt, and seem to work really well for the printers at the library. I'm just not sure if they are something that Prusa should promote as a company. Maybe with a fist full of disclaimers that you really don't officially support them, but users can make changes to the git repository for the vendor folder?

See my (limited) designs on:
Printables - https://www.printables.com/@Sembazuru
Thingiverse - https://www.thingiverse.com/Sembazuru/designs

Opublikowany : 04/03/2020 1:06 am
Strona 2 / 2
Share: