Sliced object disappears. Why?
 
Notifiche
Cancella tutti

Sliced object disappears. Why?  

  RSS
TeachThePrints
(@teachtheprints)
Eminent Member
Sliced object disappears. Why?

What could possibly be the reason for PrusaSlicer to slice all 3 parts, but then ignore the middle part (the backplate)? One can even see how the skirt runs around the gears, but straight through the backplate. 

On the Prusa Mini, it then only prints the two gears. 

Any ideas on what's going on here?

Best Answer by Swiss_Cheese:

@teachtheprints

 

It looks lie the file was imported into Slicer this way, I used the "split to parts" feature in slicer then "dropped the offending part to the bed" and it should all be good now.

 

fusion 360 tut9 v2_Swiss.Zip

Enjoy

 

Swiss_Cheese

Prusa Mini FW4.2.4

Postato : 01/07/2022 11:00 am
cwbullet
(@cwbullet)
RE: Sliced object disappears. Why?

Upload the 3MF file so we can see your files and settings.

--------------------
Chuck H
3D Printer Review Blog

Postato : 01/07/2022 11:12 am
TeachThePrints
(@teachtheprints)
Eminent Member
Topic starter answered:
RE: Sliced object disappears. Why?

Attached is the 3mf file. 

Actually printed the file and it exhibited the strangest behaviour: it would finish printing the two gears and then print the backplate. Though the Prusa Mine Preview screen doesn't show the backplate at all.  

fusion 360 tut9 v2.3mf

Prusa Mini FW4.2.4

Postato : 01/07/2022 11:35 am
Swiss_Cheese
(@swiss_cheese)
Noble Member
RE: Sliced object disappears. Why?

@teachtheprints

 

It looks lie the file was imported into Slicer this way, I used the "split to parts" feature in slicer then "dropped the offending part to the bed" and it should all be good now.

 

fusion 360 tut9 v2_Swiss.Zip

Enjoy

 

Swiss_Cheese

The Filament Whisperer

Postato : 01/07/2022 3:53 pm
TeachThePrints hanno apprezzato
TeachThePrints
(@teachtheprints)
Eminent Member
Topic starter answered:
RE: Sliced object disappears. Why?

Oh, neat. I didn't see, that the offending part wasn't on the buildplate. I was so impressed that Fusion 360 had a "3D print" feature, that would send everything straight to PrusaSlider, that I didn't check the rest. 

Prusa Mini FW4.2.4

Postato : 01/07/2022 5:58 pm
Swiss_Cheese
(@swiss_cheese)
Noble Member
RE: Sliced object disappears. Why?

  😉 👍 

The Filament Whisperer

Postato : 01/07/2022 7:35 pm
Condividi: