Notifications
Clear all
Settings first layer speed
I have problems with PETG blobbing on to the nozzle when printing the first layer, so I would like to set first layer to always print at the speed of 15mm/s and acceleration of 300mm/s2, is this possible without creating loads of new user preset print settings for all the different layer heights and nozzle sizes?
I really don't like having to remember to change the first layer settings for every new print.
Custom printer gcode? I don't really care if all materials use the slow first layer, but also might be beneficial to be able to set different first layer speed based on material, PLA, PETG etc., on the custom gcode...
I'm using Prusa XL and PrusaSlicer 2.7.2
Posted : 17/03/2024 1:23 pm