PrusaSlicer 2.9.0-alpha1 with Multiple beds, Scarf seams and much more
 
Notifications
Clear all

PrusaSlicer 2.9.0-alpha1 with Multiple beds, Scarf seams and much more  

  RSS
MarkusRe
(@markusre)
Eminent Member
PrusaSlicer 2.9.0-alpha1 with Multiple beds, Scarf seams and much more

I wanted these features soooo much. Link to GitHub: PrusaSlicer 2.9.0-alpha1

Posted : 20/11/2024 8:59 pm
FoxRun3D
(@foxrun3d)
Famed Member
RE: PrusaSlicer 2.9.0-alpha1 with Multiple beds, Scarf seams and much more

And still no straight line painting tool for seams….

Scarf seams might be useful, everything else I find hard to get excited about. But then again, it's a point release so good for them.

Formerly known on this forum as @fuchsr -- until all hell broke loose with the forum software...

Posted : 20/11/2024 10:33 pm
MarkusRe
(@markusre)
Eminent Member
Topic starter answered:
RE: PrusaSlicer 2.9.0-alpha1 with Multiple beds, Scarf seams and much more

 

Posted by: @foxrun3d

And still no straight line painting tool for seams….

That's why I use Windows 11 as a workaround for slicing. Press left mouse button on the starting point and hold it. Press and release left ALT key. Release left mouse button. Click left mouse button on the end point of the seam. Better than waiting.....

 

Posted : 20/11/2024 11:01 pm
Brian liked
FoxRun3D
(@foxrun3d)
Famed Member
RE: PrusaSlicer 2.9.0-alpha1 with Multiple beds, Scarf seams and much more

There's actually a similar shortcut for the Mac if you have a three button mouse. I use it but it's very finicky. Geez, how hard can it be to implement...

Formerly known on this forum as @fuchsr -- until all hell broke loose with the forum software...

Posted : 20/11/2024 11:18 pm
MarkusRe
(@markusre)
Eminent Member
Topic starter answered:
RE: PrusaSlicer 2.9.0-alpha1 with Multiple beds, Scarf seams and much more

More curious Pro Tips: ( The Brush Tool ) By Swiss_Cheese  . Closing the painting menu with ESC and reopen it. Sounds to me more like a bug used as a feature. I agree should be an obvious function in the painting menu for ages.

Posted : 20/11/2024 11:31 pm
aginies
(@aginies)
Active Member
RE: PrusaSlicer 2.9.0-alpha1 with Multiple beds, Scarf seams and much more

Where is the Linux AppImage version?

Currently there is only Windows and Mac...

Posted : 22/11/2024 9:39 am
Walter Layher
(@walter-layher)
Prominent Member
RE: PrusaSlicer 2.9.0-alpha1 with Multiple beds, Scarf seams and much more

Read the announcement: https://github.com/prusa3d/PrusaSlicer/releases/tag/version_2.9.0-alpha1

Posted : 22/11/2024 9:59 am
aginies
(@aginies)
Active Member
RE: PrusaSlicer 2.9.0-alpha1 with Multiple beds, Scarf seams and much more

arghh... I completly bypassed the introduction which was clearly a wrong idea... next time I will read all the paragraph instead of reading only features topics.

 

Posted : 22/11/2024 10:35 am
Reini
(@reini-2)
Member
RE:

Could the supported Platforms be included in the according release notes? I was on a long search to now find out that there is no Linux version available via Flathub at this moment...

This post was modified 4 weeks ago 2 times by Reini
Posted : 27/11/2024 10:35 am
Neophyl
(@neophyl)
Illustrious Member
RE: PrusaSlicer 2.9.0-alpha1 with Multiple beds, Scarf seams and much more

They are in the release notes.  The full ones on Github.  Always go to the source rather than rely on distributions 🙂  Even Prusa ones lol.

Posted : 27/11/2024 1:56 pm
Reini
(@reini-2)
Member
RE: PrusaSlicer 2.9.0-alpha1 with Multiple beds, Scarf seams and much more

I meant the supported ones available on Flatpak not in general (I use the Linux 2.8.1 Version using Flatpak already)

I checked here: https://github.com/prusa3d/PrusaSlicer/releases/tag/version_2.9.0-alpha1 but on the section "Linux: Distribution through Flathub" there is no information about where to get the alpha version..

Did I miss something here?

 

Posted : 27/11/2024 2:48 pm
Sembazuru
(@sembazuru)
Prominent Member
RE: PrusaSlicer 2.9.0-alpha1 with Multiple beds, Scarf seams and much more

I haven't played with the alpha yet, but I'm curious. How well does PS 2.9.0a1 import a Bambu Studio or Orca Slicer .3mf that has multiple beds? (And vice-versa...)

See my (limited) designs on:
Printables - https://www.printables.com/@Sembazuru
Thingiverse - https://www.thingiverse.com/Sembazuru/designs

Posted : 27/11/2024 5:01 pm
Walter Layher
(@walter-layher)
Prominent Member
RE: PrusaSlicer 2.9.0-alpha1 with Multiple beds, Scarf seams and much more

Did you read the section below the heading "Linux: Distribution through Flathub" of the link that you posted? All the info is there.

Posted : 27/11/2024 5:12 pm
Reini
(@reini-2)
Member
RE: PrusaSlicer 2.9.0-alpha1 with Multiple beds, Scarf seams and much more

Did you read the section below the heading "Linux: Distribution through Flathub" of the link that you posted? All the info is there.

Yes I did. After trying it just right now again using the following command again it worked:

flatpak run com.prusa3d.PrusaSlicer//beta

By the time of writing my first entry, I did not get the alpha version, which was the reason for all those posts.... Next time I will let pass some days before I try to install it.

Posted : 27/11/2024 8:02 pm
Share: