PrusaSlicer 2.8 Moonraker multiple printers
 
Notifications
Clear all

PrusaSlicer 2.8 Moonraker multiple printers  

  RSS
eaman
(@eaman)
Membre
PrusaSlicer 2.8 Moonraker multiple printers

I have multiple printers on my Linux-Klipper host, so one is on port 7125 and an other 1726. If I configure the printer as myhost:7125 Prusaslicer is able to upload and print gcodes but the Physical Printer tab won't show me Fulidd web interface, it shows me the "Welcome to Moonraker" html page.

How can I configure the internal web app to use port 80?

Publié : 08/07/2024 2:32 pm
Joerg Kraemer
(@joerg-kraemer)
New Member
RE: PrusaSlicer 2.8 Moonraker multiple printers

I just put IP xxx.xxx.xxx.xxx:port

eg.

172.10.10.100:80

And it works for me.

Publié : 09/07/2024 6:22 am
eaman a aimé
eaman
(@eaman)
Membre
Topic starter answered:
RE: PrusaSlicer 2.8 Moonraker multiple printers

I just put IP xxx.xxx.xxx.xxx:port

Where please?

Do you have multiple printers on that Klipper host?

Port 80 is the web server, Moonraker usually goes on ports >7125  with multiple printers, maybe you have just one printer?

Publié : 10/07/2024 12:23 am
eaman
(@eaman)
Membre
Topic starter answered:
RE: PrusaSlicer 2.8 Moonraker multiple printers

To clarify: PrusaSlicer needs a field to specify the host interface url like OrcaSlicer does:

Publié : 12/07/2024 5:44 am
Partager :