Notifications
Clear all

printing error  

  RSS
yuuki.1942
(@yuuki-1942)
New Member
printing error

Hi. i have diy 3d printer. i like the prusaslicer a lot because is easy to use.

The  problem is what i put in the slicer and what the printer prints is 90% but only on this part design.

https://drive.google.com/file/d/1fQQLV5jzmcolEDObZRxGE18v3jNEURBQ/view?usp=sharing

in the picture the skirt should be bigger at bottom but it is missing it. and when it is finished the skirt and does the first layer the x axis just stay inactive and only the y is moving , only after some time the x moves.and it print the rest.

https://drive.google.com/file/d/1Nw_shRIuNVKb1MCW8dUllfitynuucwln/view?usp=sharing

Can someone explain how i am missing the rest of the part. other part works great.with no error.

Posted : 25/04/2020 11:05 am
yuuki.1942
(@yuuki-1942)
New Member
Topic starter answered:
RE: printing error

i did another print with a different part but the same thing is happening.

https://ibb.co/McRQk8s

to this

https://ibb.co/MkZQpj0

 

 

Posted : 25/04/2020 9:10 pm
yuuki.1942
(@yuuki-1942)
New Member
Topic starter answered:
RE: printing error

ok. i found the problem. the bed size in the marlin firmware does not match with slicer.

Posted : 25/04/2020 9:54 pm
JoanTabb
(@joantabb)
Veteran Member Moderator
RE: printing error

@yuuki-1942

Thanks Yuuki, 
 I looked at your 3mf file and it looked fine in my Prusa slicer,  
was your Printbed bigger than Marlin was expecting? 

regards Joan

 

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Posted : 25/04/2020 10:11 pm
Share: