One part is slicing without internal perimeters or infill. What's wrong?
I'm designing a part and the next rev isn't slicing correctly in PrusaSlicer 2.2.0. There's no infill and no interior perimeters.
When I drop the previous rev STL on the plater next to it, that one slices as expected, but the new rev doesn't.
I have tried reexporting from Solidworks as a new STL and as a 3MF but I get the same result.
Here's a screenshot. The old rev on the left (showing 15% gyroid infill) and the new rev on the right.
I tried uploading a .3mf file but it says that's not allowed for security reasons.
Best Answer by Area51:
The STL model in the 3mf project appears to be hollow when loaded into a CAD program. PS is correctly slicing and creates a thin wall model from that.
Maybe the model was hollowed out by accident before export to STL.
RE: One part is slicing without internal perimeters or infill. What's wrong?
I zipped the .3mf and attached it here:
RE: One part is slicing without internal perimeters or infill. What's wrong?
The STL model in the 3mf project appears to be hollow when loaded into a CAD program. PS is correctly slicing and creates a thin wall model from that.
Maybe the model was hollowed out by accident before export to STL.
Have a look at my models on Printables.com 😉
RE: One part is slicing without internal perimeters or infill. What's wrong?
Maybe the model was hollowed out by accident before export to STL.
I dug into the CAD model and this is exactly what happened. Once I fixed that, it sliced as expected.
Thanks.