Notifiche
Cancella tutti
Missing T0 or T1 in GCode for Dual Extruder
Hello,
I have a small problem
I have a 3D printer with 2 individual extruders.
At Simplify3 Do I have T0 or T1 for the extruder in the GCode output.
PrusaSlicer is missing T0 or T1 ???
My printer is waiting for T0 ; Extruder 0 activated
PrusaSlicer
M107 M190 S90 ; set bed temperature and wait for it to be reached M104 S230 ; set temperature ;TYPE:Custom M109 S230 ; set temperature and wait for it to be reached
Simply3D
M106 S0 M140 S90 M190 S90 M104 S230 T0 M104 S0 T1 M109 S230 T0 ; process Process1 ; layer 1, Z = 0.200 T0 ;Extruder 0 Enabled
I don't want to do this manually all the time
Postato : 16/01/2022 10:39 am
RE: Missing T0 or T1 in GCode for Dual Extruder
You can add those lines to the start g-code in the printer settings of PrusaSlicer. But you need to be in expert mode.
Postato : 16/01/2022 11:09 am