Layer height and Extruder Layer Heights - Min
 
Notifications
Clear all

Layer height and Extruder Layer Heights - Min  

  RSS
Lize
 Lize
(@lize)
Estimable Member
Layer height and Extruder Layer Heights - Min

I see under extruder - layer heights - min and max:

Min is set to 0.07 but there are 0.05 ultra detail printer settings.  The 0.05mm one works fine with the number of layers changing and very minor but visible differences in the print itself compared to a 0.07mm one using 0.4mm nozzle.  Also noticed that the variable layer height option goes as low as 0.05mm.

Bit puzzled so wondered if anyone could offer an explanation please?

Posted : 12/03/2021 2:12 pm
Lize
 Lize
(@lize)
Estimable Member
Topic starter answered:
RE: Layer height and Extruder Layer Heights - Min

Just noticed, when I set printer settings to 0.3mm profile and decrease the height in parts for the variable layer it seems to use the 0.07 extruder setting as the minimum.

Working the other way round and using 0.05 profile and increasing layer height the 0.07 limit doesn't get applied.

Posted : 12/03/2021 2:20 pm
Share: