Avisos
Vaciar todo
Ignore Bridges possible? Just print across small gaps..
Hi all,
I'm facing a small issue that I couldn't find a solution for after a few hours of research and testing.
This is my 1st Layer:
The 2nd Layer bridges the gaps like this:
As a schematic to explain what I'd like:
This is right now:
-||----||---||----||-
||||| ||||| ||||| ||||
What I want:
___________________
||||| ||||| ||||| ||||
I want the slicer to simply ignore the gaps and just print 90° on the first layer in full length.
The gaps are 0.5 mm, so it wouldn't be an issue to just move across them.
But I have no idea how to get the slicer to do that.
Printer is an mk3s with SuperPINDA, 0.4mm Nozzle, printing PLA.
Thanks in advance!
Rasmus
Respondido : 02/07/2024 9:12 pm