Notifiche
Cancella tutti
Help with strange slicer issue.
Hi, I've used PrusaSlicer with great results on my other printer. I thought I would try it with my Tronxy X5S corexy. I'm getting strange results using PrusaSlicer and Slic3r on some prints. For some reason it's causing the top of small perimeters to look like a blob. I get good results with Cura and Kisslicer.
Edit, the same extrusion percentage in each slicer.
One print is sliced with Cura. The "blob" print with PrusaSlicer. Any help would be greatly appreciated. 
Questa discussione è stata modificata 5 years fa da craigslist373
Postato : 26/10/2019 3:10 pm
RE: Help with strange slicer issue.
Those two parts look like they came off different entirely printers. One with a 0.2 mm nozzle and 0.05 mm layers, the other with a 0.6 mm nozzle with 0.3 mm layers.
Postato : 27/10/2019 4:31 pm