Download of Prusa Slicer 2.2.9.1 failed
 
Benachrichtigungen
Alles löschen

Download of Prusa Slicer 2.2.9.1 failed  

  RSS
Max
 Max
(@max-5)
New Member
Download of Prusa Slicer 2.2.9.1 failed

Dear all,

I just tried to download the current version of Prusa Slicer and have the following problem:

wget.exe  https://prusa3d.com/downloads/drivers/prusa3d_win_2_2_9_1.exe 
--16:34:14-- https://prusa3d.com/downloads/drivers/prusa3d_win_2_2_9_1.exe
=> `prusa3d_win_2_2_9_1.exe.2'
Resolving prusa3d.com... 185.115.1.124
Connecting to prusa3d.com|185.115.1.124|:443... connected.
ERROR: Certificate verification error for prusa3d.com: unable to get local issuer certificate
ERROR: certificate common name `*.vshosting.cz' doesn't match requested host name `prusa3d.com'.
To connect to prusa3d.com insecurely, use `--no-check-certificate'.
Unable to establish SSL connection.

wget.exe --no-check-certificate https://prusa3d.com/downloads/drivers/prusa3d_win_2_2_9_1.exe
--16:34:20-- https://prusa3d.com/downloads/drivers/prusa3d_win_2_2_9_1.exe
=> `prusa3d_win_2_2_9_1.exe.2'
Resolving prusa3d.com... 185.115.1.124
Connecting to prusa3d.com|185.115.1.124|:443... connected.
WARNING: Certificate verification error for prusa3d.com: unable to get local issuer certificate
WARNING: certificate common name `*.vshosting.cz' doesn't match requested host name `prusa3d.com'.
HTTP request sent, awaiting response... 200 OK
Length: 380.393.624 (363M) [application/x-msdos-program]

17% [======================> ] 66.535.043 23.44M/s

16:34:26 (23.39 MB/s) - Connection closed at byte 66535043. Retrying.

Can anyone help?
Max.

Veröffentlicht : 24/09/2020 2:39 pm
Max
 Max
(@max-5)
New Member
Themenstarter answered:
RE: Download of Prusa Slicer 2.2.9.1 failed

... now i got it...

Thanks and my apology for any confusion

Max.

Veröffentlicht : 26/09/2020 2:27 am
glimps
(@glimps)
Active Member
RE: Download of Prusa Slicer 2.2.9.1 failed

Well thanks to this post I downloaded it using wget.

It is still an issue though. Download fails so many times Safari and Chrome just won't complete. 

Using wget here is my log : 

 

(base) ➜  ~ wget  https://prusa3d.com/downloads/drivers/prusa3d_mac_2_2_9_1.dmg\#_ga\=2.56457966.419443059.1605471179-1119712760.1605471179 
--2020-11-16 11:28:18-- https://prusa3d.com/downloads/drivers/prusa3d_mac_2_2_9_1.dmg
Resolving prusa3d.com (prusa3d.com)... 185.115.1.124
Connecting to prusa3d.com (prusa3d.com)|185.115.1.124|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 591104401 (564M) [application/x-apple-diskimage]
Saving to: ‘prusa3d_mac_2_2_9_1.dmg’

prusa3d_mac_2_2_9_1 0%[ ] 2.55M 2.09MB/s in 1.2s

2020-11-16 11:28:20 (2.09 MB/s) - Connection closed at byte 2670191. Retrying.

--2020-11-16 11:28:21-- (try: 2) https://prusa3d.com/downloads/drivers/prusa3d_mac_2_2_9_1.dmg
Connecting to prusa3d.com (prusa3d.com)|185.115.1.124|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 591104401 (564M) [application/x-apple-diskimage]
Saving to: ‘prusa3d_mac_2_2_9_1.dmg’

prusa3d_mac_2_2_9_1 0%[ ] 1.44M 1.69MB/s in 0.9s

2020-11-16 11:28:23 (1.69 MB/s) - Connection closed at byte 2670191. Retrying.

--2020-11-16 11:28:25-- (try: 3) https://prusa3d.com/downloads/drivers/prusa3d_mac_2_2_9_1.dmg
Connecting to prusa3d.com (prusa3d.com)|185.115.1.124|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 591104401 (564M) [application/x-apple-diskimage]
Saving to: ‘prusa3d_mac_2_2_9_1.dmg’

prusa3d_mac_2_2_9_1 0%[ ] 1.25M 1.31MB/s in 1.0s

2020-11-16 11:28:26 (1.31 MB/s) - Connection closed at byte 2670191. Retrying.

--2020-11-16 11:28:29-- (try: 4) https://prusa3d.com/downloads/drivers/prusa3d_mac_2_2_9_1.dmg
Connecting to prusa3d.com (prusa3d.com)|185.115.1.124|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 591104401 (564M) [application/x-apple-diskimage]
Saving to: ‘prusa3d_mac_2_2_9_1.dmg’

prusa3d_mac_2_2_9_1 1%[ ] 9.75M 2.41MB/s in 5.0s

2020-11-16 11:28:35 (1.96 MB/s) - Connection closed at byte 10223215. Retrying.

--2020-11-16 11:28:39-- (try: 5) https://prusa3d.com/downloads/drivers/prusa3d_mac_2_2_9_1.dmg
Connecting to prusa3d.com (prusa3d.com)|185.115.1.124|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 591104401 (564M) [application/x-apple-diskimage]
Saving to: ‘prusa3d_mac_2_2_9_1.dmg’

prusa3d_mac_2_2_9_1 100%[===================>] 563.72M 6.66MB/s in 78s

2020-11-16 11:29:58 (7.21 MB/s) - ‘prusa3d_mac_2_2_9_1.dmg’ saved [591104401/591104401]



Veröffentlicht : 16/11/2020 4:33 pm
bobstro
(@bobstro)
Illustrious Member
RE: Download of Prusa Slicer 2.2.9.1 failed

Bithead types might prefer to download directly from Prusa's github site.

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Veröffentlicht : 16/11/2020 5:02 pm
glimps
(@glimps)
Active Member
RE: Download of Prusa Slicer 2.2.9.1 failed

@bobstro

It's not that I don't enjoy a bit of pre-release software myself, but in 3D printing I prefer official releases. 

Short of compiling, the official download page seems to be the only official place to get latest stable. 

 

 

Veröffentlicht : 16/11/2020 5:31 pm
Neophyl
(@neophyl)
Illustrious Member
RE: Download of Prusa Slicer 2.2.9.1 failed

@mjsdesign

No, all the releases are available on GitHub, not just the pre release versions. You can download any of them. Except for the very latest commits they are all precompiled. 

Veröffentlicht : 16/11/2020 5:37 pm
bobstro
(@bobstro)
Illustrious Member
RE: Download of Prusa Slicer 2.2.9.1 failed
Posted by: @mjsdesign

[...] It's not that I don't enjoy a bit of pre-release software myself, but in 3D printing I prefer official releases. 

The final official release of 2.2.0 can be found here

 

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Veröffentlicht : 16/11/2020 6:09 pm
Teilen: