Notifications
Clear all

Custom GCODE  

  RSS
1liminal1
(@1liminal1)
New Member
Custom GCODE

Hey guys, 

Whats can someone please give me the correct language for my custom GCODE? Its got to do with the temp settings, but i'm not sure what?

 

Thanks!

G21 ; set units to millimeters

G90 ; use absolute positioning

M82 ; absolute extrusion mode

 

M104 S{material_print_temperature_layer_0} ; set extruder temp

M140 S{material_bed_temperature_layer_0} ; set bed temp

 

G28 X0 Y0 ;move X/Y to min endstops

G28 Z0 ;move Z to min endstops

G29

 

M190 S{material_bed_temperature_layer_0} ; wait for bed temp

M109 S{material_print_temperature_layer_0} ; wait for extruder temp

 

G0 X0 Y15 F9000 ; Go to front

G0 Z0.15 ; Drop to bed

G92 E0 ; zero the extruded length

G1 X40 E25 F500 ; Extrude 25mm of filament in a 4cm line

G92 E0 ; zero the extruded length

G1 E-1 F500 ; Retract a little

G1 X80 F4000 ; Quickly wipe away from the filament line

G1 Z0.3 ; Raise and begin printing.

Posted : 29/02/2020 2:25 am
1liminal1
(@1liminal1)
New Member
Topic starter answered:
RE: Custom GCODE

Actually I seem to have a more pressing problem of stopping a print LOL

I'm using Astro Print and I can send the print ok. But cant stop it???

Posted : 29/02/2020 2:33 am
1liminal1
(@1liminal1)
New Member
Topic starter answered:
RE: Custom GCODE

What I mean by that is no monitoring and aborting a print that doesn't look like its going to work?

 

Thanks 

Posted : 29/02/2020 2:43 am
Share: