Notifications
Clear all
Idle temperature (Leerlauftemperatur) leads to delay
Idle temperature:
Why is the default setting of 130°C necessary (e.g., for PLA+PETG)?
This causes a remarkable delay to several minutes before printing starts,
as the extruder first heats up to 170°C and then has to cool back down to 130°C.
If I read it right, this is only necessary for real Multi-Head-Printers like XL.
But why is this setting default for Profiles for the Core One ?
Napsal : 11/09/2025 2:24 pm