Avisos
Vaciar todo
Página 2 / 2
Anterior
RE:
Public service announcement:
Do not use Vision Miner Nano Polymer Adhesive with Prusament ASA on a Garolite G10 build plate. The parts will weld themselves to the plate. I had to melt it off with acetone. I couldn't pop the part off by flexing the sheet because it has a rigid steel backing (so the parts can't pull the sheets from the bed).
I'll try it without the adhesive this time...
Respondido : 31/01/2026 9:29 pm
Página 2 / 2
Anterior