Core One and using multiple color filament
I'm new to 3d printing, but i see the MMU3 is the part i need to enable multicolor printing smoothly, but i dont see any suggestions or how to install with the Core One. Please let me know if the MMU3 is compatible, and how to properly order it.
RE: Core One and using multiple color filament
The CoreOne will be compatible with the MMU3. Some have already added the MMU3 with their own hacks. See the CoreOne assembly and first print discussion area. Firmware 6.3.2 has an MMU selection. Most of us with an existing MMU on another printer are waiting for the "official" Prusa Design mods and slicer configuration updates to transer it over. Hopefully in a month or two.
RE: Core One and using multiple color filament
I recovered the MMU3 from my MK4S and mounted it on my CORE ONE. The MMU3 is now functional; I made some adaptations while waiting for the official version from Prusa Research ( https://www.printables.com/model/1283543-prusa-core-one-mmu3-install-and-mmu3-setup).
RE: Core One and using multiple color filament
Very nice write up. Thanks for sharing! (Corrected Link Below)
https://www.printables.com/model/1283543-prusa-core-one-mmu3-install-and-mmu3-setup
MK4S/MMU3
RE: Core One and using multiple color filament
Prusa just posted an update video about the MMU options they are going with.