Notifications
Clear all

Enclosure comprehensive review  

Page 2 / 2
  RSS
Neolker
(@neolker)
Member
RE: Enclosure comprehensive review

That's something I've been looking for a while. Unfortunately soundproofing is essential for me, due to the location of the printer at work and home.

Thanks for the honest review!

Posted by: @scoutstorm

...

AND SOME NOTES
• They make the printers louder than when I had them on cement pavers. There is no space for a paver in these enclosure without modification so I opted not use them. If you want to use them say, in your office, I would recommend not installing the foam aligners on the bottom and using an appropriately sized paver instead (may need a center support foot to keep the metal from bending)

...

Posted : 19/09/2022 12:42 pm
tjb_altf4
(@tjb_altf4)
New Member
RE: Enclosure comprehensive review

Interested in hearing from OP whether he has had any QC issues on any of the subsequent enclosures orders?

I had a missing back panel when I first started building the enclosure (they sent me 3 side panels), and when I went to install the PSU quick disconnect it was incorrectly terminated so the disconnect doesn't connect.  Seems to difficult issue to assess for the QC team as I've been waiting 2 weeks for feedback about the quick disconnect.

Posted : 07/12/2022 3:05 am
ScoutStorm
(@scoutstorm)
Bioluminous
Topic starter answered:
RE: Enclosure comprehensive review

Well I’m not a he, but whatever. No QC issues with any of the five enclosures received. Hard to see from the pics but are the terminals wrong on the right connector?

Posted : 07/12/2022 5:41 am
tjb_altf4 liked
Pedroid
(@pedroid)
Trusted Member
RE: Enclosure comprehensive review

I had no problems either with my enclosure.

What i really, really appreciate is the amount of spare nuts, screws whatever.

What surprised me was that the advanced filtration system doesn't suck the air out of the enclosure but is a circulation system. And it is quite noisy.

Posted : 07/12/2022 7:23 am
tjb_altf4 liked
tjb_altf4
(@tjb_altf4)
New Member
RE: Enclosure comprehensive review

Yes, the male plug on the right is the problem, it has 2 male pin and 4 female pin/sockets (should have 6 male pins), the female plug has 6 female pin/sockets.  Opposing sides need a male and female to connect.

The 4 incorrect terminations are the power, the 2 that were terminated correctly are for the power panic.

Posted by: @scoutstorm

Well I’m not a he, but whatever. No QC issues with any of the five enclosures received. Hard to see from the pics but are the terminals wrong on the right connector?

 

Posted : 07/12/2022 8:15 am
Page 2 / 2
Share: