Notifications
Clear all
First print from PRUSA slicer failed
Wanted to print MMU3 Label Plate
Setup 3 heads, white, black and orange. PETG
Lots of issues, says not compatible, change to make each PETG. Tool crash.
Says binary code note compatible, have latest firmware for XL. Tool head always says crashed, then reboots.
Give up.
Files on USB stick do work.
This topic was modified 12 months temu by John McCauley
Opublikowany : 07/12/2023 11:20 pm
Topic starter
answered:
RE: First print from PRUSA slicer failed
Chatted with support. Tried again and it worked!
Opublikowany : 08/12/2023 1:04 am
RE: First print from PRUSA slicer failed
So what was the issue??
Opublikowany : 08/12/2023 1:50 am
RE: First print from PRUSA slicer failed
Take your support and run, an appropriate response would be in order, this does not help anyone.
Opublikowany : 11/12/2023 6:48 pm