Benachrichtigungen
Alles löschen

SL1S Shipping Schedule?  

Seite 7 / 8
  RSS
ScoutStorm
(@scoutstorm)
Bioluminous
.

It's strange that they have the individual parts available for the upgrade, but not the kit. There doesn't seem to be instructions for upgrading yet, maybe they're waiting to get those ready. I wish they were more open with delays, especially since they already have our money.

Veröffentlicht : 18/08/2021 8:35 pm
Matt gefällt das
Area51
(@area51)
Mitglied
Upgrade instructions still missing

@bioluminous
Some complete SL1S printers has been shipped, therefore the need for spare parts.

The upgrade kit needs an instruction to complete, maybe PR is still working on that. Upgrade kits cannot be shipped without instruction (it will be a support mess).
To my knowledge the upgrade instruction is still missing in the on-line user guide section.

Have a look at my models on Printables.com 😉

Veröffentlicht : 18/08/2021 9:40 pm
Lichtjaeger gefällt das
MikeH
(@mikeh)
Estimable Member
Upgrade shipped

My SL1S upgrade "shipped" today to me in the USA via FedEx.  Based on past experience, that means that FedEx will actually get it tomorrow and I'll receive by end of next week.

Veröffentlicht : 25/08/2021 11:06 pm
mibauer gefällt das
Area51
(@area51)
Mitglied
SL1 -> SL1S Upgrade instruction

@mikeh-2 great to hear. Let us know when you receive the kit and how the upgrade goes.

Looks like the upgrade instruction is now available in the Prusa Knowledge Base here.

Have a look at my models on Printables.com 😉

Veröffentlicht : 25/08/2021 11:15 pm
mibauer und ScoutStorm gefällt das
Matt
 Matt
(@matt-15)
Active Member
Upgrade shipped

My upgrade was shipped out also but via DHL Express, states estimated delivery for the 31st 🤞

Veröffentlicht : 26/08/2021 12:48 am
mibauer und ScoutStorm gefällt das
Olef
 Olef
(@olef)
Prominent Member
Upgrade Shipped

Just received shipping confirmation of my upgrade order placed on 16th June, an hour or so after announcement 🙂

Veröffentlicht : 26/08/2021 1:47 pm
ScoutStorm und mibauer gefällt das
Sindarius
(@sindarius)
Mitglied
Shipping Notification

Just got my shipping notification for the upgrade as well 😀

Veröffentlicht : 26/08/2021 4:12 pm
ScoutStorm gefällt das
Matt
 Matt
(@matt-15)
Active Member
arrived

The upgrade kit has arrived :O That was some fast shipping!

Veröffentlicht : 26/08/2021 4:39 pm
sylviatrilling, Area51, ScoutStorm und 1 weiteren Personen gefällt das
prus-77
(@prus-77)
Active Member
.

I've just had the shipping notification email for my upgrade, ordered 17th June - DHL to UK.

Veröffentlicht : 27/08/2021 3:43 pm
sylviatrilling und ScoutStorm gefällt das
Canadian Custom Woodwerx
(@canadian-custom-woodwerx)
Mitglied
Pics of upgrade kit

Pics of the kit or it didn't happen. 😄

Veröffentlicht : 27/08/2021 4:25 pm
Matt
 Matt
(@matt-15)
Active Member
Update

Haha will get you some pictures when I'm home 😅 

 

The build went pretty smoothly, only snag was the printed fan shroud, I had to slightly debur one of the screw holes as the screw wouldn't go all the way in, but other than that it was sound!

Oh and we do get two of each sticker "S" and "speed", most important part 😉

Veröffentlicht : 27/08/2021 4:35 pm
ScoutStorm gefällt das
ScoutStorm
(@scoutstorm)
Bioluminous
Stickers too!

I got my upgrade ship notification this morning too. Ordered on 16 June with a spare tank.

I personally think the upgrade will be better than the straight-up SL1S. I think the new orange cover with the opaque top was made like that to save money as the older style ones on the SL1 maybe are cast instead of extruded? Or maybe the top is welded, I have no idea. I just know they're more expensive in the parts store.

My old display has many stuck pixels at this point but I'm hoping to use it for some project like a transparent clock. I wonder if I can connect it to a raspberry pi? With the attached metal frame it seems a shame to let the nice part go to waste. Anyone else have any plans? What about the LED unit?

Veröffentlicht : 27/08/2021 4:59 pm
sylviatrilling gefällt das
Matt
 Matt
(@matt-15)
Active Member
RE: Installed

 

Posted by: @ec

Pics of the kit or it didn't happen. 😄

Loving the speed on it, will save me quite abit of time! Items I print are pretty small so from just over 1 hour I'm finishing them in 30 now 🙂

 

Only issue im having which was present from the SL1 too so its not just this upgrade although i was hoping this upgrade would resolve it, but I get bubble lines in my prints and sometimes they appear on the surface of the print too as very small pinholes, it seems to be reduced on the SL1S though from my testing so far, but still present and no idea how to resolve it. Not my picture, but an exmaple of what it looks like:

Diese r Beitrag wurde geändert Vor 3 years 3 mal von Matt
Veröffentlicht : 27/08/2021 10:45 pm
Canadian Custom Woodwerx
(@canadian-custom-woodwerx)
Mitglied
shipping box

How big was the box your upgrade kit came in?

 

I just got my shipping note and the box is listed as 17*7*9    Seems pretty big for the contents of the upgrade kit...

Veröffentlicht : 29/08/2021 12:07 am
Canadian Custom Woodwerx
(@canadian-custom-woodwerx)
Mitglied
shipping box

How big was the box your upgrade kit came in?

 

I just got my shipping note and the box is listed as 17*7*9    Seems pretty big for the contents of the upgrade kit...

Veröffentlicht : 29/08/2021 12:07 am
ScoutStorm
(@scoutstorm)
Bioluminous
RE: Pictures 🙂

Got my upgrade today. The box was larger than I had expected too - those measurements seem correct though.

Some notes:
• The FEP film holes are clear, so there's no little circles that will pop off and stick to everything.
• The included tank which appears to be made of glass fiber reinforced plastic, comes with three thin molded lids (why three?)
• The build plate does not come with the top part, so if you were planning on using the old build plate when the new one was being washed, that won't work. It's possible this is purposeful as the new one might be a different height. Oh well.
• The new LED lens array is beautiful. It's a shame it'll be hidden inside because it's really a nice thing to look at.
• Power supply does not come with AC cord, so you'll need to re-use the old one.
• Upgrade stickers are indeed included, so your old dank SL1 can be SL1S Speed and no one will suspect anything fishy.
• Most important: includes Haribo, 100g pocket size!

Here are some pics. Let me know if you have any questions.

 

Veröffentlicht : 30/08/2021 7:46 pm
sylviatrilling
(@sylviatrilling)
Honorable Member
Cool

Happy upgrading!

Mk3S+,SL1S

Veröffentlicht : 30/08/2021 8:17 pm
ejberg
(@ejberg)
Estimable Member
Another upgrade shipped

Status update:

My SL1S upgrade, ordered 19th of June, has shipped today. With a little luck, it'll be here before the weekend.

 

Veröffentlicht : 01/09/2021 12:41 pm
Area51 gefällt das
ejberg
(@ejberg)
Estimable Member
... and received

Package sent yesterday, and delivered a few minutes ago. I think I know what I'll spend my time on this weekend 🤩 

Veröffentlicht : 02/09/2021 2:24 pm
prus-77
(@prus-77)
Active Member
.

My upgrade just arrived too - transit time to UK was 6 days.

Veröffentlicht : 02/09/2021 2:28 pm
Seite 7 / 8
Teilen: